Bedienungsanleitung Pioneer SC-LX704 (Seite 164 von 223) (Englisch)

699655

164

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

164

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Audio Adjust

 Dual Mono/Mono

Change the settings of multiplex audio playback.

Setting Item Default Value Setting Details

Dual Mono Main Set the audio channel or language to be output

when playing multiplex audio or multilingual

broadcasts, etc.

"Main": Main channel only

"Sub": Sub channel only

"Main/Sub": Main and sub channels are output at

the same time.

• For multiplex audio broadcasts, pressing the

button on the remote controller will display "1+1"

on the main unit’s display.

Mono Input

Channel

Left + Right Set the input channel to play 2-ch digital sources

such as Dolby Digital, or 2-ch analog/PCM sources

in the Mono listening mode.

"Left": Left channel only

"Right": Right channel only

"Left + Right": Left and right channels

 Dolby

Change the setting of when Dolby signals are input.

Setting Item Default Value Setting Details

Loudness

Management

On When playing Dolby TrueHD, enable the dialog

normalization function which keeps the volume of

dialog at a certain level. Note that when this setting

is Off, the Midnight function that allows you to enjoy

surround at low volumes is xed to off when playing

Dolby Digital Plus/Dolby TrueHD.

"On": When this function is used

"Off": When this function is not used

 DTS/IMAX

Change the setting of when DTS signals are input.

Setting Item Default Value Setting Details

Dialog Control 0 dB You can increase the volume of dialog portion of

the audio up to 6 dB by 1 dB step so that you can

hear the dialog easily in noisy atmosphere.

• This cannot be set for content other than DTS:X.

• Depending on the content, this function may not

be selected.

IMAX Mode Auto Set the IMAX sound mode.

“Auto”: IMAX sound mode is automatically applied

when IMAX content is detected.

“On”: In cases when this unit is unable to recognize

IMAX content, you can apply the IMAX sound

mode by turning this setting “On”.

"Off": Disable this function

IMAX User

Setting

Auto When playing IMAX content with the IMAX sound

mode, select whether to automatically apply the

speaker setting recommended by IMAX or to set it

manually.

“Auto”: To use the speaker setup recommended by

IMAX.

“Manual”: To manually set “IMAX Bass Feeding”

and “IMAX LFE Mute Level”.

• This cannot be selected when the IMAX Mode

is “Off”.

IMAX Bass

Feeding

Set the route for the bass component of the audio.

“On”: The bass component of each channel is output

according to the crossover settings ( p160)

“Off”: Only the LFE signal is output.

• This cannot be selected when the "IMAX User

Setting” is “Auto”.

IMAX LFE Mute

Level

0 dB You can set the volume for the LFE when IMAX

signals are being input. Select “–∞ dB” or a value

between "0 dB" and "-20 dB".

• This cannot be selected when the "IMAX User

Setting” is “Auto”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 164

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info