Bedienungsanleitung Pioneer SC-LX704 (Seite 190 von 223) (Englisch)

699655

190

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

190

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 Advanced EQ Setup

Reverberation characteristics are automatically calibrated according to the

settings made. After making the following settings, place the speaker setup

microphone in the listening position, and connect to the SETUP MIC jack on the

main unit. Press ENTER and follow the on screen instructions.

Setting Item Default Value Setting Details

Time Position 30 - 50 msec Specify the calibrated time position in the range

between "0 - 20 msec" and "60 - 80 msec" (10

msec intervals).

If the reverberation characteristics differ for each

frequency or each channel in the Reverb View

graph, we recommend selecting "30 - 50 msec". If

the overall reverberation characteristics are similar,

we recommend selecting "60 - 80 msec".

EQ Type Symmetry Select the calibration type.

"Symmetry": Speakers that make one set as a left

and right pair have their frequency characteristics

calibrated atly. Speakers not in pairs, such as

the center speaker, are adjusted individually.

Select when you want to give weight to phase

characteristics for calibration.

"All Channel Adjust": Flatly calibrates individually

the frequency characteristics of all speakers.

Select when you want to give weight to frequency

characteristics for calibration.

"Front Align": Calibrates speakers other than

the front speakers so their characteristics match

those of the front speakers (front speakers are not

calibrated). Select when you want to give weight to

characteristics of the front speakers for calibration.

Standing Wave

Multi Position

No When you select "2” to “9", standing wave

calibration can be performed at multiple listening

positions along with the main listening position. If

there is only one listening position, select "No".

•

If you select "2” to “9”, calibration is rst performed

for the locations other than the main position, then

the main position is calibrated last.

MCACC Data Check

You can check the number of speaker channels connected and the content and

values you have set for each of the speaker settings. Depending on the item, you

can check by changing the MCACC memory or Channel with the cursors.

 Speaker Setting

You can check the number of speaker channels connected and the large and

small settings you have set for the low range reproduction capabilities for each of

the speakers.

 Channel Level

You can check the output level settings for each of the speakers.

 Speaker Distance

You can check the distance from each speaker to the listening position.

 Standing Wave

You can check the settings of the standing wave control lter.

 Acoustic Calibration EQ

You can check the calibration values for the frequency characteristics of each

speaker that were set in "Manual MCACC".

 Group Delay

You can check the group delay of speakers before and after calibration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 190

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info