Bedienungsanleitung Pioneer SC-LX704 (Seite 202 von 223) (Englisch)

699655

202

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

202

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

SETUP MIC

When placing the speaker setup microphone on a tripod, refer to the

illustration.

2. Conrm a test tone is output from the subwoofer and press ENTER.

3. Press ENTER. Then, test tones are output from each speaker, and the

connected speakers and the noise in the surrounding environment are

automatically measured.

4. The measurement results in step 3 are displayed. If there is no problem in

the detection result of the speaker, select "Next" and press ENTER to output

the test tone again to automatically set the settings such as volume level,

crossover frequency, etc., to their optimum. (The test tone is automatically

output when 10 seconds has elapsed without any operation.)

• When an error message is displayed or when the connected speakers

cannot be detected, perform re-measurement by selecting "Retry" and

pressing ENTER.

• When it cannot be resolved by performing the re-measurement, conrm

if the speakers are connected correctly. If there is any problem with the

speaker connection, perform the connection after disconnecting the power

cord.

5. Once the measurement is completed, it is possible to perform the

measurement in 8 additional listening positions. To perform the measurement,

select "Next" and press ENTER, then follow the instructions. To not perform

the measurement, select "Finish (Calculate)" and press ENTER.

• After each listening position is detected, select "Finish (Calculate)" and

press ENTER to complete the detection process.

6. Disconnect the speaker setup microphone.

 3. Multi Zone Sound Check

Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in

addition to the main room.

 4. ARC Setup

To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit

turns on, and you can listen to the TV's audio through this unit.

• If you select "Yes", the HDMI CEC function is enabled and power consumption

increases during standby.

 5. Network Connection

1. To make the network connection settings, select "Yes" and press ENTER. A

conrmation screen asking you to agree to the privacy statement is displayed

during network setting, so select “Accept” if you agree and then press ENTER.

2. Select the type of connection to the network. To use the Chromecast built-in

function to connect, select “Yes” and press ENTER. The Google Home app is

required to use the Chromecast built-in function. Download the Google Home

app from Google Play or the App Store to your smart phone or tablet.

• Google Home app can be used on the following operating systems. (As of

August 2019)

Android

™

: Android 4.4 or later.

iOS: iOS 10.0 or later. Compatible with iPhone

, iPad

, and iPod touch

Wi-Fi

11 2

If you select "No", you can connect using either wired LAN or Wi-Fi.

"Wired": Use a wired LAN to connect to a network.

"Wireless": Wi-Fi connection using an access point such as a wireless LAN

router.

• There are two methods for Wi-Fi connection.

"Scan Networks": Search for an access point from this unit. Find out the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX704 Seite 202

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX704

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info