Bedienungsanleitung Pioneer SC-LX78-S (Seite 60 von 141) (Englisch)

580827

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

Basic playback

Saving station presets

If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy

recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This

receiver can memorize up to 63 stations, stored in seven banks, or classes (A to G) of 9 stations each.

1 Tune to a station you want to memorize.

See Listening to the radio on page 59 for more on this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET MEMORY, then a blinking memory class.

3 Press CLASS to select one of the seven classes, then press PRESET +/– to select the station

preset you want.

You can also use the number buttons to select a station preset.

4 Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.

Listening to station presets

1 Press TUNER to select the tuner.

2 Press CLASS to select the class in which the station is stored.

Press repeatedly to cycle through classes A to G.

3 Press PRESET +/– to select the station preset you want.

! You can also use the number buttons on the remote control to recall the station preset.

Naming station presets

For easier identification, you can name your station presets.

1 Choose the station preset you want to name.

See Listening to station presets on page 60 for how to do this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET NAME, then a blinking cursor at the first character position.

3 Input the name you want.

Use i/j (or TUNE i/j of front panel) to select a character, k/l (or PRESET k/l of front panel) to set the

position, and ENTER to confirm your selection.

Notes

! To erase a station name, simply repeat steps 1 to 3 and input eight spaces instead of a name.

! Once you have named a station preset, you can press DISP when listening to a station to switch the display

between name and frequency.

An introduction to RDS (for Europe)

Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of

information-the name of the station and the kind of show they’re broadcasting, for example.

One feature of RDS is that you can search by type of program. For example, you can search for a station that’s

broadcasting a show with the program type, JAZZ.

You can search the following program types:

! In addition, there are two other program types, TEST and NONE. You can’t search for these.

NEWS - News

AFFAIRS - Current Affairs

INFO - General Information

SPORT - Sport

EDUCATE - Educational

DRAMA - Radio plays, etc.

CULTURE - National or regional culture, theater, etc.

SCIENCE - Science and technology

VARIED - Usually talk-based material, such as quiz shows or

interviews.

POP M - Pop music

ROCK M - Rock music

EASY M - Easy listening

LIGHT M - ‘Light’ classical music

CLASSICS - ‘Serious’ classical music

OTHER M - Music not fitting above categories

WEATHER - Weather reports

FINANCE - Stock market reports, commerce, trading, etc.

CHILDREN - Programs for children

SOCIAL - Social affairs

RELIGION - Programs concerning religion

PHONE IN - Public expressing their views by phone

TRAVEL - Holiday-type travel rather than traffic announce-

ments

LEISURE - Leisure interests and hobbies

JAZZ - Jazz

COUNTRY - Country music

NATION M - Popular music in a language other than English

OLDIES - Popular music from the ’50s and ’60s

FOLK M - Folk music

DOCUMENT - Documentary

Searching for RDS programs

One of the most useful features of RDS is the ability to search for a particular kind of radio program. You can

search for any of the program types listed above.

1 Press TUNER to select the FM band.

! RDS is only possible in the FM band.

2 Press PTY.

PTY SEARCH shows in the display.

3 Press PRESET +/– to select the program type you want to hear.

4 Press ENTER to search for the program type.

The system starts searching through all frequencies for a match. When it finds one, the search stops and the

station plays for five seconds.

5 If you want to keep listening to the station, press ENTER within the five seconds.

If you don’t press ENTER, searching resumes.

If NO PTY is displayed it means the tuner couldn’t find that program type at the time of the search.

! RDS searches all frequencies. If the program type could not be found among all the frequencies, NO PTY is

displayed.

Displaying RDS information

Use the DISP button to display the different types of RDS information available.

! If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly.

! If you see NO RT DATA in the RT display, it means no RT data is sent from the broadcast station.

! If you see NO PS DATA in the PS display, it means no PS data can be received.

! If you see NO PTY DATA in the PTY display, it means no PTY data can be received.

% Press DISP for RDS information.

Each press changes the display as follows:

! Radio Text (RT) – Messages sent by the radio station. For example, a talk radio station may provide a phone

number as RT.

! Program Service Name (PS) – The name of the radio station.

! Program Type (PTY) – This indicates the kind of program currently being broadcast.

! Current tuner frequency.

Pioneer SC-LX78-S Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX78-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info