Bedienungsanleitung Pioneer SC-LX78-S (Seite 76 von 141) (Englisch)

580827

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

Control with HDMI function

! When anything other than OFF is set for this setting, the receiver’s HDMI input can be switched even when

the receiver is in the standby mode. (Switch by pointing the remote control at the receiver and pressing the

HDMI, BD, DVD or SAT/CBL button.)

! Setting to anything other than OFF increases power consumption in the standby mode.

! This setting can be used even with devices that are not compatible with the Control with HDMI function.

! The Standby Through function cannot be used with MHL-compatible devices.

9 Select the ‘12V Trigger’ setting you want.

The component connected to the 12 V TRIGGER jack can be turned on and off when HDMI OUT is switched.

OUT 1, OUT 2, OUT 3 or OFF can be selected. Select OFF when you want the component to switch when the

input function is switched.

10 Select the ‘Speaker B Link’ setting you want.

When ON is selected here, the speaker terminals that are played (the OUT P. button setting) can be changed

automatically when HDMI OUT 1 and HDMI OUT 2 are switched. This only works when 7.2ch + Speaker B or

5.2ch + SP-B Bi-Amp is selected for the Speaker System setting.

! OFF – The speaker terminals that are played (the OUT P. button setting) do not change automatically when

HDMI OUT 1 and HDMI OUT 2 are switched.

! ON – The speaker terminals that are played (the OUT P. button setting) change automatically when HDMI

OUT 1 and HDMI OUT 2 are switched. For details, see Switching the HDMI output on page 83 .

11 When you’re finished, press HOME MENU.

Before using synchronization

Once you have finished all connections and settings, you must:

1 Put all components into standby mode.

2 Turn the power on for all components, with the power for the TV being turned on last.

3 Choose the HDMI input to which the TV is connected to this receiver, and see if video

output from connected components displays properly on the screen or not.

4 Check whether the components connected to all HDMI inputs are properly displayed.

About synchronized operations

Important

! Synchronized operations are enabled when Control Mode is set to ON after setting Control in HDMI Setup to

ON. For details, see HDMI Setup on page 75 .

The Control with HDMI-compatible component connected to the receiver operates in sync as described below.

! From the menu screen of the Control with HDMI-compatible TV, set audio to be played through this receiver,

and the receiver will switch to the synchronized amp mode.

! When in the synchronized amp mode, you can adjust the receiver’s volume or mute the sound using the TV’s

remote control.

! When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver’s power is

turned off. To turn the synchronized amp mode back on, set audio to be played through the receiver from the

TV’s menu screen, etc. This receiver will power up and switch to the synchronized amp mode.

! When the synchronized amp mode is canceled, the receiver’s power turns off if you were viewing an HDMI

input or a TV program on the TV.

! When in the synchronized amp mode, the synchronized amp mode is canceled if an operation that produces

sound from the TV is performed from the TV’s menu screen, etc.

! When the TV’s power is set to standby, the receiver’s power is also set to standby. (Only when the input for a

component connected to the receiver by HDMI connection is selected or when watching the TV.)

! The receiver’s input switches automatically when the Control with HDMI-compatible component is played.

! The receiver’s input switches automatically when the TV’s input is switched.

! The synchronized amp mode remains in effect even if the receiver’s input is switched to a component other

than one connected by HDMI.

The operations below can also be used on Pioneer Control with HDMI-compatible TVs.

! When the receiver’s volume is adjusted or the sound is muted, the volume status is displayed on the TV’s

screen.

! When the OSD language is switched on the TV, the receiver’s language setting also switches accordingly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX78-S Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX78-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info