Bedienungsanleitung Pioneer SC-LX78-S (Seite 110 von 141) (Englisch)

580827

110

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

110

The System Setup and Other Setup menus

10 Adjust the bass (BASS) and treble (TREBLE) to your tastes.

This can only be set when ZONE 2 is selected in step 2 and ON is selected in step 8.

The BASS and TREBLE can each be adjusted between –10.0dB and +10.0dB, in 1 dB steps.

11 When you’re finished, press RETURN.

You will return to the Other Setup menu.

On Screen Display Setup

When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over

the video output on the display. This status display can be turned off by switching this setting to OFF. The setting

can be made for the main zone and HDZONE, respectively.

! Default: ON (both the main zone and HDZONE)

1 Select ‘On Screen Display Setup’ from the Other Setup menu.

2 Select and set the main zone or HDZONE for which you wish to change the setting.

3 Select the On Screen Display setting you want.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! The on-screen display is only displayed for video output from the HDMI terminal.

! When the video input signal is a 3D signal, the on-screen display may not be displayed.

! The size of the characters displayed differs according to the output resolution.

Play ZONE Setup

Select the zone for playing the audio contents of devices in the home network when using in the DMR mode.

! For playable DLNA-compatible network devices, see page 69 .

1 Select ‘Play ZONE Setup’ from the Other Setup menu.

2 Select the zone in which you want to play the audio contents.

3 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Notes

! If another zone is on, it may not be possible to play the audio contents. In this case, turn the other zone off,

then play the audio contents.

! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 109 ).

Multi Channel Input Setup

SC-LX88 only

You can adjust the level of the subwoofer for a multi-channel input. Also, when the multi-channel input is

selected as an input function, you can display the video images of other input functions. In the Multi Channel

Input Setup, you can assign a video input to the multi-channel input.

1 Select ‘Multi Ch In Setup’ from the Other Setup menu.

2 Select the ‘SW Input Gain’ setting you want.

! 0dB – Outputs sound of the subwoofer at the level originally recorded on the source.

! +10dB – Outputs sound of the subwoofer at the level increased by 10 dB.

3 Select the ‘Video Input’ setting you want.

When the multi-channel input is selected as an input function, you can display the video images of other input

functions. The video input can be selected from the following: SAT/CBL, DVR/BDR, OFF.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Maintenance Mode

Only use this if so instructed by a Pioneer service engineer or custom installer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX78-S Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX78-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info