Bedienungsanleitung Pioneer SC-LX78-S (Seite 127 von 141) (Englisch)

580827

127

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

127

Additional information

Auto Surround, ALC and Stream Direct with different input signal

formats

The following charts show what you will hear with different input signal formats, depending on the Stream Direct

mode (see Using Stream Direct on page 65 ) you have selected.

Stereo (2 channel) signal formats

Input signal format

Auto Surround /

DIRECT

ALC PURE DIRECT

Surround Back speaker(s): Connected

Dolby Digital Surround

Dolby Surround Dolby Digital Dolby Surround

DTS Surround

Neo:X CINEMA

DTS

Neo:X CINEMA

Other stereo sources Stereo playback Stereo playback Stereo playback

Analog sources As above As above ANALOG DIRECT (stereo)

PCM sources As above As above Stereo playback

DVD-A sources As above As above As above

SACD sources As above As above As above

Surround Back speaker(s): Not connected

Dolby Digital Surround

Dolby Surround Dolby Digital Dolby Surround

DTS Surround

Neo:X CINEMA DTS Neo:X CINEMA

Other stereo sources Stereo playback Stereo playback Stereo playback

Analog sources As above As above ANALOG DIRECT (stereo)

PCM sources As above As above Stereo playback

DVD-A sources As above As above As above

SACD sources As above As above As above

Multichannel signal formats

Input signal format Auto Surround / PURE DIRECT / DIRECT

Surround Back speaker(s): Connected

Dolby Digital EX (6.1 channel flagged)

Dolby TrueHD EX (6.1 channel flagged)

Dolby Surround

<a>

DTS-HD Master Audio ES (6.1 channel flagged) DTS-ES (Matrix)

DTS-ES (6.1 channel sources/6.1 channel flagged) DTS-ES (Matrix/Discrete)

DTS sources (5.1 channel encoding) Straight decoding

DTS-HD sources As above

Other 5.1/6.1/7.1 channel sources As above

Surround Back speaker(s): Not connected

DVD-A sources/Multi-ch PCM Straight decoding

SACD sources (5.1 channel encoding) As above

Other 5.1/6.1/7.1 channel sources As above

a Unavailable with only one surround back speaker connected.

Dolby Atmos format

Input signal format Auto Surround / PURE DIRECT / DIRECT

Dolby Atmos format Straight decoding

! ALC cannot be selected when the input signal is Dolby Atmos format.

! For details on Dolby Atmos, see page 131 .

Speaker Setting Guide

In order to achieve an even better surround effect, it is important to accurately position the speakers and make

their volume and tone characteristics uniform so as to finely focus the multi-channel sound.

The three major elements in positioning the speakers are distance, angle and orientation (the direction in

which the speakers are pointing).

Distance: The distance of all the speakers should be equal.

Angle: The speakers should be horizontally symmetrical.

Orientation: The orientation should be horizontally symmetrical.

In most homes, however, it is not possible to achieve this environment. For the distance, on this receiver it is pos-

sible to automatically correct the speaker distance electrically to a precision of 1 cm using the Full Auto MCACC

Setup function (page 49 ).

Step 1: Speaker layout and distance adjustment

Use speaker stands or the like to make sure the speakers are steady, and leave at least 10 cm from the surround-

ing walls. Position the speakers attentively so that the speakers on the left and right are at equal angles from the

listening position (center of the adjustments). (We recommend using cords, etc., when adjusting the layout.)

Ideally all the speakers should be equidistant from the listening position.

Note

If the speakers cannot be set at equal distances (on a circle), use the Auto MCACC Setup speaker distance cor-

rection and Fine Speaker Distance functions to make them equalize the distance artificially.

Step 2: Adjusting the speaker height

Adjust the heights (angles) of the different speakers.

Adjust so that the front speaker units reproducing mid- and high frequencies is roughly at the height of the ears.

If the center speaker cannot be set at the same height as the front speakers, adjust its angle of elevation to point

it to the listening position.

Set surround speaker 1 so that it is not under the height of the ears.

Step 3: Adjusting the speaker orientation

If the left and right speakers are not pointing in the same direction, the tone will not be the same on the right

and left, and as a result the sound field will not be reproduced properly. However, if all the speakers are pointed

towards the listening position, the sound field will seem cramped. Testing by the Pioneer Multi-channel Research

Group has shown that a good sense of sound positioning can be achieved by pointing all the speakers towards an

area 30 cm to 80 cm behind the listening position (between the surround speakers and the listening position).

However, the sense of sound positioning can differ according to the conditions in the room and the speakers

being used. In smaller environments in particular (when the front speakers are close to the listening position),

with this method the speakers will be pointed too inward. We suggest you use this example of installation as

reference when trying out different installation methods.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX78-S Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX78-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info