Bedienungsanleitung Pioneer SC-LX801 (Seite 33 von 108) (Englisch, Französisch, Spanisch)

651434

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

> Before start > Hookup > Setup > Playback >Part Names

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. Input selector buttons: Select the input to be played. Use the

buttons in 3 to select "STRM BOX", "AUX", or "PHONO".

3. 21 buttons: Input source played switches each time you press

one of these buttons.

4. (AV ADJUST) button: You can perform common settings on

the TV screen. (



P28)

5. Cursor buttons and ENTER button: Select the item with the

cursors and press ENTER to confirm your selection.

6. button: Displays the Home.

(



P29)

7. Volume buttons: Allows you to adjust the volume. This button

also cancels the muting.

8. button: Temporarily mutes audio. Press again to cancel

muting.

9. LISTENING MODE buttons: Allows you to select the listening

mode. (



P24)

MAIN/ZONE 2/ZONE 3 buttons: Controls the multi-zone function.

(



P27)

10.

Play buttons: You can start play of the Music Server or USB.

11.

button: You can start repeat or random play of the Music

Server or USB.

CLEAR button: Deletes all characters you have entered when

entering text on the TV screen.

12.

(STATUS) button: Switches the information on the display.

13.

button: Returns the display to the previous state.

14.

MODE button: Switches tuning to an AM/FM station between

automatic tuning and manual tuning.

15.

+Fav button: Used to register AM/FM radio stations.

30°

Approx.5 m (16 ft.)

Display

1. Lights when operating the "NET", "USB" input selector indicating

remote controller cursor operations are possible in screens showing

list of tracks, for example.

2. Lights in the following conditions.

Z2/Z3: When ZONE 2/ZONE 3 is on.

: When connected by BLUETOOTH.

: When connected by Wi-Fi.

NET: When "NET" is selected with the input selector and the unit is

connected to the network. It will flash if the connection to the network

is not correct.

USB: When "USB" is selected with the input selector and the unit is

connected by USB and the USB device is selected. Flashes if the

USB is not properly connected.

HDMI: When HDMI signals are input and the HDMI input is selected.

DIGITAL: When digital signals are input and the digital input is

selected.

3. Lights according to the type of input digital audio signals and the

listening mode.

4. Lights in the following conditions.

RDS (European and Asian models): Receiving RDS broadcasting.

TUNED: Receiving AM/FM radio.

STEREO: Receiving FM stereo.

SLEEP: When the sleep timer is set.

AUTO STBY: When Auto Standby function is enabled.

5. The currently selected speaker system lights.

6. Lights when headphones are connected.

7. Flashes when muting is on.

8. Displays various information of the input signals. Characters that

cannot be displayed on this unit are replaced with asterisks ( ＊ ).

9. Lights when adjusting the volume.

10.

Speaker/Channel display: Displays the output channel that

corresponds to the selected listening mode.

2 3

65 7

SN29402397_SC-LX801_701_BAS_En.book 33 ページ２０１６年６月６日　月曜日　午後５時３６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX801 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info