Bedienungsanleitung Pioneer SC-LX86 (Seite 5 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

488896

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Initial Setup

Before you start

Put the batteries in the remote control.

The batteries included with the unit are to check initial

operations; they may not last over a long period. We

recommend using alkaline batteries that have a longer life.

Switch on the receiver and your TV.

RCU SETUP

SOURCERECEIVER

ALL ZONE STBY

DISCRETE ON

BDR

BD DVDDVR HDMI

Switch the TV input so that it connects to the

receiver.

Turn the subwoofer on and turn up the volume.

WARNING

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a heater.

This can cause batteries to leak, overheat, explode or catch

fire. It can also reduce the life or performance of batteries.

CAUTION

• When disposing of used batteries, please comply with

governmental regulations or environmental public institu-

tion’s rules that apply in your country/area.

Automatically setting up for

surround sound (MCACC)

The Auto Multi-Channel Acoustic Calibration (MCACC) setup

uses the supplied setup microphone to measure and analyze

the test tone that is outputted by the speakers. This setup

enables automatic high precision measuring and settings;

utilizing it will create an optimum user listening environment.

Important

• Measure in a quiet environment.

• If you have a tripod, use it to place the microphone so

that it’s about ear level at your normal listening position.

Otherwise, place the microphone at ear level using a table

or a chair.

• Accurate measurements may not be possible if there are

obstacles between the speakers and the listening position

(microphone).

• When measuring, step away from the listening position,

and operate using the remote control from the external

side of all the speakers.

Connect the supplied setup microphone.

MCACC

SETUP

MIC

The

Full Auto MCACC

screen appears on your TV.

Speaker System : 9.1ch FH/FW

1a.Full Auto MCACC

A/V RECEIVER

Exit Return

START

EQ Type : SYMMETRY

MCACC : M1.MEMORY 1

THX Speaker : NO

Press

RECEIVER

on the remote control, then

press the ENTER button.

• Automatic measuring will start.

• Measuring will take about 3 to 12 minutes.

Follow the instructions on-screen.

• Automatic setting is complete when the Home Menu

screen appears.

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

5. Network Information

6. Operation Mode Setup

Exit Return

HOME MENU

A/V RECEIVER

Make sure the setup microphone is

disconnected.

Canceling the Auto Power Down

If no operation is performed for a certain amount of time with

no audio or video signal being input, the receiver’s power turns

off automatically. The automatic power-off timer is set to 30

minutes under factory settings, and the timing can be changed

or the power-off function switched off altogether.

“Auto Power Down”

Tripod

Microphone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX86 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX86

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info