Bedienungsanleitung Pioneer SC-LX87 (Seite 9 von 139) (Englisch)

536830

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

Before you start

Installing the receiver

! When installing this unit, make sure to put it on a level and stable surface.

! Don’t install it on the following places:

— on a color TV (the screen may distort)

— near a cassette deck (or close to a device that gives off a magnetic field). This may interfere with the sound.

— in direct sunlight

— in damp or wet areas

— in extremely hot or cold areas

— in places where there is vibration or other movement

— in places that are very dusty

— in places that have hot fumes or oils (such as a kitchen)

! Do not touch this receiver’s bottom panel while the power is on or just after it is turned off. The bottom panel

becomes hot when the power is on (or right after it is turned off) and could cause burns.

Loading the batteries

The batteries included with the unit are to check initial operations; they may not last over a long period. We rec-

ommend using alkaline batteries that have a longer life.

WARNING

! Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or perfor-

mance of batteries.

CAUTION

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

! Never use new and old batteries together.

! Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

! When inserting the batteries, make sure not to damage the springs on the battery’s (–) terminals. This can

cause batteries to leak or overheat.

! Batteries with the same shape may have different voltages. Do not use different batteries together.

! When disposing of used batteries, please comply with governmental regulations or environmental public insti-

tution’s rules that apply in your country/area.

Operating range of remote control unit

The remote control may not work properly if:

! There are obstacles between the remote control and the receiver’s remote sensor.

! Direct sunlight or fluorescent light is shining onto the remote sensor.

! The receiver is located near a device that is emitting infrared rays.

! The receiver is operated simultaneously with another infrared remote control unit.

30°

7 m

About using AVNavigator (included CD-ROM)

The included AVNavigator CD-ROM contains Wiring Navi allowing you to easily make the receiver’s connections

and initial settings in dialog fashion. High precision initial settings can be completed easily simply by following

the instructions on the screen to make the connections and settings.

There are also other features enabling easy use of various functions, including an Interactive Manual that oper-

ates in association with the receiver, updating of various types of software, and MCACC Application that lets you

check the MCACC measurement results on 3D graphs.

! The Mac OS version of AVNavigator can be downloaded from http://www.pioneer.eu.

! The iPad version of AVNavigator can be downloaded from the App Store.

! The provided CD-ROM includes the Windows version of AVNavigator.

Installing AVNavigator for Windows

1 Launch the desktop from the start screen (for Windows 8 only).

2 Load the included CD-ROM into your computer’s CD drive.

The CD-ROM’s top menu screen appears.

! A screen for selecting the CD-ROM’s operation (“Open with Explorer”, “Launch ‘MAIN_MENU.exe’”, etc.) may

be displayed. When the operation for launching “MAIN_MENU.exe” is performed, the AVNavigator menu

appears. A caution regarding security may appear during this operation, but there is no security problem, so

continue the operation.

! If the CD-ROM’s top menu screen is not displayed, double-click “MAIN_MENU.exe” on the CD-ROM. When

this is done, a caution regarding security is displayed, but there is no security problem, so continue the

operation.

3 Click “AVNavigator” on the “Installing Software” menu.

4 Follow the instructions on the screen to install.

When “Finish” is selected, installation is completed.

5 Remove the included CD-ROM from the computer’s CD drive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX87 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX87

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info