Bedienungsanleitung Pioneer SC-LX89 (Seite 19 von 151) (Englisch)

611787

Zoom out

Zoom in

Vorherige Seite

1/151

Nächste Seite

Connecting your equipment

Determining the speakers’ application

This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/

usage patterns according to their tastes. The terminals to which the speakers should be connected differ accord-

ing to the speaker layout/usage pattern. Select one speaker layout/usage pattern before connecting the speakers.

For instructions on connections, see Installing your speaker system on page 26 .

However, the 5.2 +ZONE 2+ZONE 3 and Multi-ZONE Music settings can be used separately according to the

situation. Normally set this to 5.2 +ZONE 2+ZONE 3 and use this for multi-zone/multi-source playback, and when

using the system for home parties for example, set this to Multi-ZONE Music to associate all zones with the main

zone.

! Be sure to connect speakers to the front left and right channels (L and R).

! It is also possible to only connect one of the surround back speakers (SB) or neither.

! If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal.

Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction.

! When none of the top middle, top forward + top backward, front height, front wide, and surround back speak-

ers are connected, Dolby Atmos does not play.

Choose one from Plans [A] to [N] below.

Important

! The Speaker System setting must be made if you use any of the connections shown below other than [A] (see

Speaker system setting on page 112 ).

! The speakers from which sound is output can be switched according to the speaker layout/usage pattern

(sound is not necessarily output from all connected speakers). Use the OUT P. button to switch the speakers

from which sound is output. For details, see Switching the speaker terminals on page 92 .

[A] 7.2.2 channel surround system (Surround back/Top middle) connection

*Default setting

! Speaker System setting: 7.2.2/5.2.2/7.2ch

SBR

TMdL TMdR

SBL

SRSL

SW2

SW1

A 7.2.2 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and

right top middle speakers (TMdL/TMdR), the left and right surround speakers (SL/SR), the left and right surround

back speakers (SBL/SBR), and the subwoofers (SW 1/SW 2).

This surround system produces a more true-to-life sound from above.

Playback of Dolby Atmos requires a connection with surround back speakers or top middle speakers.

[B] Dolby Enabled Speaker system connection

! Speaker System setting: 7.2.2/5.2.2/7.2ch, 9.2.2ch TMd/FH, 7.2.2ch Front Bi-Amp, 7.2.2/7.2ch + SP-B

— Speaker Setting TMd: Dolby Sp (Front)

SBR

TMdL

TMdR

SBL

SRSL

SW2

SW1

— Speaker Setting TMd: Dolby Sp (Surr)

SBR

TMdL TMdR

SBL

SRSL

SW2

SW1

— Speaker Setting TMd: Dolby Sp (SB)

SBR

TMdL TMdR

SBL

SRSL

SW2

SW1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX89 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX89

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info