Bedienungsanleitung Pioneer SC-LX89 (Seite 23 von 151) (Englisch)

611787

Zoom out

Zoom in

Vorherige Seite

1/151

Nächste Seite

Connecting your equipment

[M] 5.2 channel surround system & Center and Surround Bi-amping

connection (High quality surround)

! Speaker System setting: 5.2ch C+Surr Bi-Amp

SRSL

SW2

SW1

Surround Bi-Amp

Center

Bi-Amp

Bi-amping connection of the center and surround speakers for high sound quality with 5.2-channel surround

sound.

You cannot playback Dolby Atmos with this system.

[N-1] Multi-ZONE Music connection

[N-2] 5.2 channel surround system & ZONE 2/HDZONE connection (Multi

Zone)

[N-3] 5.2 channel surround system & ZONE 2/ZONE 3 connection (Multi Zone)

! [N-1] Speaker System setting: Multi-ZONE Music

! [N-2] Speaker System setting: 5.2 +ZONE 2+HDZONE

! [N-3] Speaker System setting: 5.2 +ZONE 2+ZONE 3

Main zone

ZONE 2

ZONE 3 or HDZONE

Sub zone

SRSL

SW2

SW1

With these connections you can simultaneously enjoy 5.2-channel surround sound in the main zone with stereo

playback on another component in ZONE 2, ZONE 3 and HDZONE. (The selection of input devices is limited.)

However, the 5.2 +ZONE 2+ZONE 3, 5.2 +ZONE 2+HDZONE and Multi-ZONE Music settings can be used sepa-

rately according to the situation. Normally set this to 5.2 +ZONE 2+ZONE 3 or 5.2 +ZONE 2+HDZONE and use

this for multi-zone/multi-source playback, and when using the system for home parties for example, set this to

Multi-ZONE Music to associate all zones with the main zone.

You cannot playback Dolby Atmos with this system.

Other speaker connections

! Your favorite speaker connections can be selected even if you have fewer than 5.2 speakers (except front left/

right speakers).

! When not connecting a subwoofer, connect speakers with low frequency reproduction capabilities to the front

channel. (The subwoofer’s low frequency component is played from the front speakers, so the speakers could

be damaged.)

! After connecting, be sure to conduct the Full Auto MCACC (speaker environment setting) procedure. See

Automatically conducting optimum sound tuning (Full Auto MCACC) on page 59 .

Placing the speakers

Refer to the chart below for placement of the speakers you intend to connect.

Listener speaker placement guidelines

Listener speakers, such as Left, Right, Center, Left Surround, and Right Surround, are placed at ear level relative

to the listener position.

2SW

FHL

FWL

SBL

SBR

FWR

FHR

30 30

120 120

! Place the surround speakers at 120º from the center. If you, (1) use the surround back speaker, and, (2) don’t

use the front height speakers / front wide speakers, we recommend placing the surround speaker right beside

you.

! If you intend to connect only one surround back speaker, place it directly behind you.

! Place the left and right front height speakers at least one meter directly above the left and right front speakers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX89 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX89

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info