Bedienungsanleitung Pioneer SC-LX904 (Seite 11 von 225) (Englisch)

699654

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

1. INPUT SELECTOR dial: Switch the input to be played.

2. STATUS button: Switches the information on the display. ( p135)

3. ZONE 2 ON/OFF button: Turns ZONE 2 ON/OFF. ( p123)

4. ZONE 3 ON/OFF button: Turns ZONE 3 ON/OFF. ( p125)

5. ZONE CONTROL button: Controls the multi-zone function. ( p122)

6. DIMMER button: You can switch the display off or adjust the brightness of the

display in three steps.

7. Display ( p12)

8. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions

such as input selector, listening mode, etc. or call the registered settings.

( p127)

9. NETWORK indicator: This lights when "NET" is selected with the input

selector and the unit is connected to the network. Lights up when any of the

following functions is working or enabled in standby state of this unit. When

this indicator is lighting, the power consumption in standby state increases,

however, the increase in power consumption is minimized by entering the

HYBRID STANDBY mode where only the essential circuits operate. It does not

light when ZONE 2/ZONE 3 is on, however.

– HDMI CEC ( p167)

– HDMI Standby Through ( p167)

– USB Power Out at Standby ( p169)

– Network Standby ( p169)

– Bluetooth Wakeup ( p169)

10.

Remote control sensor: Receives signals from the remote controller.

• The signal range of the remote controller is within about 16´/5 m, at an

angle of 20° on the perpendicular axis and 30° to either side.

11.

MCACC PRO indicator: This lights when you have enabled the speaker

calibration made with MCACC. ( p180, 203)

12.

MASTER VOLUME

13.

STANDBY/ON button: When the power is turned on, the periphery of the

button lights up. This lights dimly when you have pressed number 7 DIMMER

repeatedly to turn the display off.

14.

AV ADJUST button: Settings such as "HDMI" and "Audio" can be made quickly

during play on the TV screen. ( p198)

15.

HOME button: Displays the Home. ( p151, 179, 194)

16.

Cursor buttons ( / / / ) and ENTER button: Select the item with the

cursors and press ENTER to conrm. Use them to tune to stations when using

TUNER. ( p117)

17.

RETURN button: Returns the display to the previous state.

18.

TUNING MODE button: Switches the tuning mode. ( p117)

19.

PHONES jack: Headphones with a standard plug (ø1/4"/6.3 mm) are

connected.

20.

SETUP MIC jack: The supplied speaker setup microphone is connected.

( p180, 203)

21.

Listening mode button: Switches the listening mode. ( p133)

22.

USB port: A USB storage device is connected so that music les stored in it

can be played. ( p103)

23.

AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.

( p83)

24.

Front ap

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SC-LX904 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SC-LX904

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info