612930
6
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
6
1.3 Product mode
When using SGX-CA500, the firmware version is required to be 20150501.02.43 or higher.
Pedaling monitor mode:
When paired with Cyclocomputer SGX-CA500, the pedaling efficiency and cadence and other such properties can be
measured. You can make maximum use of the functions of this product.
Dual power meter mode:
Left and right sensors are required. The actual power values of the left and right sensors can be totaled and displayed
and the cadence can be measured. Can be used with SGX-CA500 or with a Cyclocomputer that supports ANT+ from
another manufacturer.
Single power meter mode:
The power value of the left or right sensors can be doubled and displayed quickly and the cadence can be
measured. Can be used with SGX-CA500 or with a Cyclocomputer that supports ANT+ from another
manufacturer
2 Mode Select
When using SGX-CA500, the firmware version is required to be 20150501.02.43 or higher.
2.1 Switching to the pedaling monitor mode
Cyclocomputer SGX-CA500 is required to switch to the pedaling monitor mode. The mode cannot be switched with
cyclocomputers from other manufacturers.
・The firmware version of SGX-CA500 needs to be 20150501.02.43 or higher. If it is of
a different version, update the firmware. Refer to the User's Guide (For WEB) of SGX-CA500 regarding how to update or
any other operation method.
http://pioneer-cyclesports.com/us-en/support/products/http://pioneer-cyclesports.com/jp/support/products/
2.1.1 Press the menu button on the CycloMeter screen of SGX-CA500.
2.1.2 Tap [Option] - [Pedaling settings] - [Mode Switch] in this order.
The mode switching screen opens. If the device number is already
displayed, confirm that it is the same as the device number of the sensor you
want to use. If it is the same, the input operation is not required.。
If the device number is different from the sensor you want to use, enter the
new number. Remove the check from the sensors whose mode is not to be
switched.
2.1.3 Tap on the device number display part.
The sensor device number input screen opens.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer SGY-PM910HL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer SGY-PM910HL

Pioneer SGY-PM910HL Bedienungsanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch - 234 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info