Bedienungsanleitung Pioneer SGY-PM910HR (Seite 2 von 26) (Englisch)

612931

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Table of Contents

Table of Contents ............................................................................................................................................... 2

1 Preparations ................................................................................................................................................... 4

1.1 Confirm the products .............................................................................................................................. 4

1.2 Outline of procedure ............................................................................................................................... 4

1.2.1 For the SGY-PM910HL/HR with an ANT+ cycle computer ........................................................... 4

1.2.2 For the SGY-910H2/(HL+HR) with an ANT+ cycle computer ....................................................... 4

1.2.3 For the SGY-PM910HL/HR/(HL+HR)/H2 with a SGX- CA500 ..................................................... 5

1.3 Product mode .......................................................................................................................................... 6

Pedaling monitor mode: ................................................................................................................................. 6

•Dual power meter mode: ............................................................................................................................. 6

Single power meter mode: ............................................................................................................................. 6

The power value of the left or right sensors can be doubled and displayed quickly and the cadence can be

measured. Can be used with SGX-CA500 or with a Cyclocomputer that supports ANT+ from another

manufacturer ................................................................................................................................................. 6

2 Mode Select .................................................................................................................................................... 6

2.1 Switching to the pedaling monitor mode• ............................................................................................. 6

2.1.1 Press the menu button on the CycloMeter screen of SGX-CA500. ................................................ 6

2.1.2 Tap [Option] - [Pedaling settings] - [Mode Switch] in this order. .................................................. 6

2.1.3 Tap on the device number display part. ......................................................................................... 6

2.1.4 Enter the device number and tap [ ]. .................................................................................... 7

2.1.5 Rotate the bicycle’s crank set more than three rotations to start the left and right transmitters.

2.1.6 Tap [Pedaling Monitor]. .................................................................................................................. 7

2.1.7 Add in the sensor list of SGX-CA500 .............................................................................................. 7

2.2 Switch to dual power meter mode .......................................................................................................... 8

2.2.1 [Method 1] Switch by pushing the push switch in the right transmitter ..................................... 8

2.2.2 [Method 2] Switch the mode on SGX-CA500 ................................................................................ 10

2.3 Switch to single power meter mode ..................................................................................................... 11

2.3.1 [Method 1] Switch by pushing the push switch in the right transmitter ................................... 11

2.3.2 [Method 2] Switch the sensor mode from SGX-CA500 ................................................................ 11

3 Magnet Detection and Calibration .............................................................................................................. 12

3.1 Temporarily affix the Magnet .............................................................................................................. 12

3.1.1 Use masking tape to temporarily attach the Magnet Patch ....................................................... 12

3.1.2 Rotate the rank to confirm the position of the magnets. ............................................................. 12

3.1.3 Temporarily affix the Magnet. ...................................................................................................... 13

3.1.4 Turn the crank slowly. ................................................................................................................... 13

3.2 Magnet Detection (For cycle computer other than Pioneer) ............................................................... 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SGY-PM910HR Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SGY-PM910HR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info