Bedienungsanleitung Pioneer SPH-DA130DAB (Seite 48 von 56) (Englisch)

699587

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

48En

If you have problems operating this

product, refer to this section. The most

common problems are listed below, along

with likely causes and solutions. If a

solution to your problem cannot be found

here, contact your dealer or the nearest

authorised Pioneer service facility.

A black screen is displayed, and

operation is not possible using the touch

panel keys.

 [Power OFF] mode is on.

– Press (touch) any button on this

product to release the mode.

The screen is covered by a caution

message and the video cannot be shown.

 The handbrake lead is not connected or

the handbrake is not applied.

– Connect the handbrake lead correctly,

and apply the handbrake.

 The handbrake interlock is activated.

– Park your vehicle in a safe place and

apply the handbrake.

No video output from the connected

equipment.

 The [AV Input] or [AUX Input] setting is

incorrect.

– Correct the settings.

The audio or video skips.

 This product is not firmly secured.

– Secure this product firmly.

No sounds are produced. The volume

level will not rise.

 Cables are not connected correctly.

– Connect the cables correctly.

The icon is displayed, and operation is

impossible.

 The operation is not compatible with

the video configuration.

Random playback in Music Browse mode

is released in the USB storage device.

 Random playback in Music Browse

mode is cancelled after the ignition

switch is turned off (ACC OFF).

– Switch to Music Browse mode again

and turn on random playback.

The picture is stretched, with an incorrect

aspect ratio.

 The aspect setting is incorrect for the

display.

– Select the appropriate setting for that

image.

iPod cannot be operated.

 The iPod is frozen.

– Reconnect the iPod with the USB

interface cable for iPod/iPhone.

– Update the iPod software version.

 An error has occurred.

– Reconnect the iPod with the USB

interface cable for iPod/iPhone.

– Park your vehicle in a safe place, and

then turn off the ignition switch (ACC

OFF). Subsequently, turn the ignition

switch to on (ACC ON) again.

– Update the iPod software version.

 Cables are not connected correctly.

– Connect the cables correctly.

Appendix

Troubleshooting

Common problems

Problems with the AV screen

Sound from the iPod cannot be heard.

 The audio output direction may switch

automatically when the Bluetooth and

USB connections are used at the same

time.

– Use the iPod to change the audio

output direction.

Dialing is impossible because the touch

panel keys for dialing are inactive.

 Your phone is out of range for service.

– Retry after re-entering the range for

service.

 The connection between the mobile

phone and this product cannot be

established.

– Perform the connection process.

 Of the two mobile phones connected to

this product at the same time, if the first

phone is dialling, ringing or a call is in

progress, dialling cannot be performed

on the second phone.

– When the operation on the first of the

two mobile phones is completed, use

the switch devices key to switch to the

second phone and then dial.

A black screen is displayed.

 While operating an application, the

application was ended on the

smartphone side.

– Press (touch) to display the top

menu screen.

 The smartphone OS may be awaiting

screen operation.

– Stop the vehicle in a safe place and

check the screen on the smartphone.

The screen is displayed, but operation

does not work at all.

 An error has occurred.

– Park your vehicle in a safe place, and

then turn off the ignition switch (ACC

OFF). Subsequently, turn the ignition

switch to on (ACC ON) again.

– When an Android device is connected,

disconnect the Bluetooth connection

from this product and then reconnect

it.

The smartphone was not charged.

 Charging stopped because the

temperature of the smartphone rose

due to prolonged use of the

smartphone during charging.

– Disconnect the smartphone from the

cable, and wait until the smartphone

cools down.

 More battery power was consumed

than was gained from charging.

– This problem may be resolved by

stopping any unnecessary services on

the smartphone.

Sound from AppRadio Mode + of the

Android device cannot be heard from the

speakers of this unit.

 Depending on the Android device, the

sound from AppRadio Mode + may not

be output from the speakers of this unit.

– Switch to [Smartphone] in the

[AppRadio Mode Sound] settings

(page 34).

When problems occur with this product, an

error message appears on the display.

Refer to the table below to identify the

problem, then take the suggested

corrective action. If the error persists,

record the error message and contact your

dealer or your nearest Pioneer service

centre.

Problems with the phone screen

Problems with Application

screen

Error messages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SPH-DA130DAB Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SPH-DA130DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info