Bedienungsanleitung Pioneer SPH-DA130DAB (Seite 6 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

699587

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

6En

CAUTION

• Never install this product in places where,

or in a manner that:

–Could injure the driver or passengers if

the vehicle stops suddenly.

– May interfere with the driver’s operation

of the vehicle, such as on the floor in

front of the driver’s seat, or close to the

steering wheel or gearstick.

• To ensure proper installation, be sure to

use the supplied parts in the manner

specified. If any parts are not supplied

with this product, use compatible parts in

the manner specified after you have the

part compatibility checked by your

dealer. If parts other than supplied or

compatible ones are used, they may

damage internal parts of this product or

they may work loose and the product

may become detached.

• Do not install this product where it may

(i) obstruct the driver’s vision, (ii) impair

the performance of any of the vehicle’s

operating systems or safety features,

including airbags, hazard lamp buttons

or (iii) impair the driver’s ability to safely

operate the vehicle.

• Never install this product in front of or

next to the place in the dashboard, door,

or pillar from which one of your vehicle’s

airbags would deploy. Please refer to your

vehicle’s owner’s manual for reference to

the deployment area of the frontal

airbags.

• Consult with your nearest dealer if

installation requires drilling holes or

other modifications of the vehicle.

• Before making a final installation of this

product, temporarily connect the wiring

to confirm that the connections are

correct and the system works properly.

• Do not install this product in places

subject to high temperatures or

humidity, such as:

–Places close to a heater, vent or air

conditioner.

–Places exposed to direct sunlight, such

as on top of the dashboard.

–Places that may be exposed to rain,

such as close to the door or on the

vehicle’s floor.

• Install this product horizontally on a

surface within 0 to 30 degrees tolerance

(within 5 degrees to the left or right).

Improper installation of the unit with the

surface tilted more than these tolerances

increases the potential for errors in the

vehicle’s location display, and might

otherwise cause reduced display

performance.

• When installing, to ensure proper heat

dispersal when using this unit, make sure

Installation

Precautions before

installation

Before installing

Installation notes

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

1 Remove the trim ring.

Extend top and bottom of the trim ring

outwards to remove the trim ring.

Trim ring

2 Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3 Pull the unit out of the holder.

Extraction key

1 Install the holder into the dashboard.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Holder

3 Install this product into the holder.

Dashboard

4 Attach the trim ring.

Trim ring

Before installing this

product

Leave ample

space

5 cm

Installation with the

holder

112 mm

182 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SPH-DA130DAB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SPH-DA130DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info