Bedienungsanleitung Pioneer SX-20-S (Seite 10 von 15) (Englisch)

491891

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

04 Operation

Listening to the radio

The following steps show you how to tune in to FM and

AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. Once you are tuned to a

station you can memorize the frequency for recall later—

see Saving station presets below for more on how to do

this.

1 Press

FM/AM

repeatedly to select the

band (FM or AM).

2 Press

T/P MODE

to change to tuning

mode.

PRESET indicator goes off.

3 Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold / for about 0.5 second. The receiver

will start searching for the next station, stopping when it

has found one. Repeat to search for other stations.

Manual tuning

To change the frequency one step at a time, press /.

High speed tuning

Press and hold / for high speed tuning.

Improving FM sound

When FM stereo broadcasts are poor because of weak

broadcast signals, select the FM MONO mode to reduce

the noise, then FM broadcasts are reproduced in

monaural sound.

1 Press

FM MODE

to select “

FM MONO

”.

Saving station presets

If you often listen to a particular radio station, it’s

convenient to have the receiver store the frequency for

easy recall whenever you want to listen to that station.

This saves the effort of manually tuning in each time.

This unit can memorize up to 30 stations.

1 Tune to a station you want to memorize.

See Listening to the radio above for more on this.

2 Press

MEM

MEM indicator is blinking.

VOLUME

MEM

P.SCAN

INPUTFM/AM

FM MODE

VOLUME

MEM

P.SCAN

INPUTFM/AM

FM MODE

VOLUME

MEM

P.SCAN

INPUTFM/AM

FM MODE

2,4

3 Within 5 seconds, press

/

to select

the station preset you want.

You can also use the numeric buttons.

Examples:

For “2” : Press “2”.

For “17” : Press “1”, then press “7” within 2 seconds.

For “30” : Press “0”.

• When using the numeric buttons, the station is

stored automatically without pressing MEM in step

• A stored frequency is erased from the memory by

storing another frequency in its place.

•If MEM indicator goes off, start again from the

above step 2.

4 Press

MEM

MEM indicator stop blinking and the receiver stores the

station.

Listening to station presets

You will need to have some presets stored to do this. See

Saving station presets above if you haven’t done this

already.

1 Press

T/P MODE

to change to preset

mode.

PRESET indicator lights up.

2 Press

/

to select the station preset

you want.

• You can also use the numeric buttons on the

remote control to recall the station preset.

Scanning preset stations in sequence

1Press

P.SCAN

The receiver will start scanning the stations in the preset

sequence.

• At the desired station, press this button again to

stop scanning.

VOLUME

MEM

P.SCAN

INPUTFM/AM

FM MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SX-20-S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SX-20-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info