Bedienungsanleitung Pioneer SX-SW77 (Seite 78 von 156) (Englisch)

791723

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Using the GUIDE Plus+™ electronic program guide

•My external receiver was successfully setup. However

I have found that when the GUIDE Plus+ system has

to change to a channel with a 3-digit program number

in the external receiver's preset, it does not work. It

looks like the GUIDE Plus+ system can only send two

digits.

With the number of channels increasing, the number

of digits has increased as well. While older boxes use

only 2 digits, newer boxes require up to 4. It is

possible that you selected an older code for your

brand during set-up. Please access the Setup Area,

select External Receiver and repeat the setup for your

brand. (Note: Every time you see the on-screen

question about whether the receiver has changed to

a certain channel, GUIDE Plus+ has sent a different

code). Try all the different codes until your GUIDE

Plus+ system can control your external receiver

correctly. If you have no success, try to receive new

codes overnight.

•I used to receive data through my terrestrial antenna or

analog cable without a set-top box. Now, I have

“upgraded” to a satellite system or to digital cable with

external receiver. What should I do to receive data for

the GUIDE Plus+ system?

You can try to receive your host channel through your

new reception method. If you have problems to

receive data we recommend that you keep your

analog terrestrial or cable connection only to receive

data this way. It is important that you identify your

host channel correctly in the Editor Area.

•After I performed the initial set-up I found that the line-

up for all the channels received via the external set top

box is incorrect. How do I correct this?

You can change the line-up in the editor according to

your preferences. Access the Editor Area. Select the

channels that you would like to change. Change the

source and preset number according to your

preferences.

•I performed the set-up but after many hours I still have

a blank EPG what is going wrong?

There are several possibilities:

– Connections are wrong. See

Connecting up

page 45 to double check everything.

– The initial setup of GUIDE Plus+ was completed

incorrectly. Try setting it up again (see

Setting up the

GUIDE Plus+™ system

on page 57).

– Your cabling and setup is OK, but the recorder has

not been connected for enough time to receive the TV

listings data. Leave the recorder in standby overnight.

– For external receiver users only: The connections

and setup are OK, but the external receiver was not

tuned to the correct host channel. Check the list of

host channels (see step 5 of

Setting up the GUIDE

Plus+™ system

on page 57) and leave the recorder

in standby and the external receiver on overnight

tuned to the correct host channel.

– You live in a country/region where the GUIDE Plus+

system is not yet available. Check the list of countries

to see if you are in a region that is supported.

•I used the One-Button-Record feature (red Action

button) to set a recording, but I recorded the wrong

channel.

If the channel to be recorded is received via the

external receiver first make sure that the external

receiver was left switched on. Next, in the Editor

Area, make sure that the channel to be recorded is

correctly set: Access the Editor Area. Check the

source and program number of the channel that you

wanted to record. Change the source and preset

numbers if incorrect.

If you are recording from the recorder’s internal tuner

(the

Tuner

setting), make sure that the program

number is the same as the preset number set on this

recorder. If they are different, go to the Editor Area

and change the program number to match the

recorder’s preset number.

• The TV listings information doesn’t update.

The latest TV listings information is automatically

downloaded by the recorder overnight. This only

happens if the recorder is in standby; if the recorder

is left on, it will not download. When not using the

recorder, please switch it into standby.

Data downloads can take several hours. The front

panel display shows

EPG

when downloading. If you

switch the recorder on while

EPG

is displayed, the

download will be canceled.

•GUIDE Plus+ is not supported in my area, but when I

switch the recorder into standby, after a while the front

panel display shows

EPG

.. Can I stop this from

happening?

If GUIDE Plus+ is not supported in your area, please

do not set the postal code in the GUIDE Plus+ setup

(see

Setting up the GUIDE Plus+™ system

page 57). When GUIDE Plus+ service starts in your

area, please set the postal code again.

DVR-530H_EU.book Page 78 Friday, May 13, 2005 3:38 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SX-SW77 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SX-SW77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info