Bedienungsanleitung Pioneer tx-1060l (Seite 6 von 12) (Englisch)

790138

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

AUTOMATIC AIMD MANUAL TUNING

• Check that all terminals are properly connected

before switching on the unit.

• Before starting to use the unit, turn the FUNCTION

switches on the stereo amplifier to TUNER.

AUTO SEARCH TUNING

The electronic tuning circuit inside the unit will search-

for your desired station automatically.

Tur-jirsjo

f •

Caution with Auto-Search:

• Since this is a highly sensitive mechanism, the frequen-

cy Auto-Search operation may stop even with weak

foreign broadcasts, particularly at night. Also, frequen-

cy noise in large cities may cause the search operation

to stop.

• When using Auto-Search to preset AM stations, if the

frequency search operation stops too frequently,

changing the position of the AM loop antenna may be

of help in reducing its sensitivity so that only powerful,

nearby stations are received. After tuning in the station,

be sure to reposition the antenna to its best position for

reception.

• For very weak stations, use the manual tuning mode to

preset stations.

MANUAL TUNING

This tuning method is used in the following cases:

• When presetting each frequency corresponding to

the desired station using the STATION CALL

switch.

(For details on the presetting memory, see

page 7.)

• When tuning in to a station irrespective of the

preset stations reception area, perform tuning

manually using the following procedure.

1 Turn on the POWER of the unit and

the stereo amplifier.

2 Select your desired broadcasting

band using the FUNCTION switch-

es.

3. Press the MANUAL/AUTO selector

so that the AUTO indicator lights.

Press the FREQUENCY/CHANNEL

selector so that the CHANNEL in-

dicator goes out.

5. Press the " + " or "-" TUNING

switch.

By simply pressing the tuning switch, the receiver will

automatically search for a station and tune in to it. By

pressing " + ", the frequency will move upwards, and

by pressing the frequency will move downwards.

Each time the switch is pressed, the next higher (or

lower) frequency station will be tuned in.

NOTE:

When the AUTO SEARCH is in use, reception may not be

possible over long distances or when signa/s are

weal<.

these times

manua/

tuning is

recommended.

/AUTO

TUNIfMIG

4 5

1 Turn on the POWER of the unit and

the stereo amplifier.

2 Select your desired broadcasting

band using the FUNCTION switch-

es.

3. Press the MANUAL/AUTO selector

so that the AUTO indicator goes

out.

Press the FREQUENCY/CHANNEL

selector so that the CHANNEL in-

dicator goes out.

5. Use the TUNING switches "-" or

" to locate the frequency of

your desired station.

For step-by-step searching, press the TUNING switch

once and release it immediately. For continuous rapid

scanning keep the TUNING switch pressed. The

OPERATION TUNED indicator will light up when the

desired station is tuned in best.

NOTE:

The OPERATION TUNED indicator will not function for

broadcasts received over long distances or

v/hen

signals are

weak.

When an FM broadcast is received in MANUAL

TUNING,

muting will not

operate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer tx-1060l Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info