Bedienungsanleitung Pioneer UDP-LX800 (Seite 25 von 64) (Englisch)

699669

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Switching the output

video resolution

Use the procedure below to switch the output

video resolution from the various video output

terminals.

 Press RESOLUTION e/r.

• The current output video resolution setting is

displayed on the player’s front panel display.

To switch the output video resolution, press

RESOLUTION e/r again.

• The output video resolution setting can also be

switched by selecting Resolution from the

Initial Setup menu (page 39).

Caution

• On some devices (TV, AV receiver or amplifier,

etc.), the video or audio may not be output

properly when the resolution is switched. If this

happens, use RESOLUTION to set a resolution

at which the video and audio are properly

output.

• When video signals are being output with a

resolution of 4K/24p, 4K, 1080/50i, 1080/50p,

720/50p, 1080/24p, 1080/60i, 1080/60p or

720/60p from the HDMI OUT terminals, the

picture may be output with an aspect ratio of

16:9, even if the TV Screen is set to 4:3

(Standard).

• The picture may not be displayed for a while

when the resolution is switched.

• When the connected device supports 3D and if

a 3D Disc is played back, the 3D output is

prioritized for output, regardless of the

resolution settings. Also, switching of

resolution may not be possible while the 3D

contents are playing.

• When Auto is selected, the picture is output at

60 frames/second if your TV is not compatible

with 1080/24p signals.

• When 4K, 4K/24p, 1080/24p or Source Direct is

selected, the signals are output as such, even if

your TV is not compatible with 4K, 4K/24p or

1080/24p signals. If the picture is not displayed

properly, use RESOLUTION e/r to set an

output video resolution at which the video and

audio signals are properly output.

• When the Resolution is set to Auto and if the

television set in use supports 4K or 4K/24p

output, then the output is made in 4K or 4K/

24p. If the connected television set does not

support 4K or 4K/24p, then the output is made

with a recommended resolution other than 4K.

• When the Resolution is set to Auto, 1080p, 4K or

4K/24p and if the resolution of output from the

HDMI is 1080p, 4K or 4K/24p, then output may

not occur depending on the HDMI cable in use.

• There are resolutions that cannot be output

depending on the television set in use.

• When the HDMI Mode is set to Pure Audio, the

1080p60, 4K/60p or 4K/24p, output will not

occur even if the resolution is set to Auto or

1080p, 4K or 4K/24p. The output will be

delivered with a resolution of 1080/60i, 1080/

24p or the like, depending on the resolution of

the source and the connected television set.

• For Dolby Vision output, the optimal resolution

is automatically set for video content.

• When playing an UHD-BD disc, if the

connected HDMI device does not support

HDCP 2.2, the video cannot be output in 4K or

4K24p resolution even if Auto, 4K24p, 4K or

Source Direct is selected. Also, depending on

the HDMI device, the HDMI or HDCP setting

may be required. Check the operating

instructions of the connected device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer UDP-LX800 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer UDP-LX800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info