Bedienungsanleitung Pioneer UDP-LX800 (Seite 34 von 64) (Englisch)

699669

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Chapter 5

Playback from Source function

About Source

function

This player’s Source function allows you to display

a list of input sources and start playback. This

chapter describes setup and playback procedures

required to enjoy these features. When you play

the files stored on your computer or the

components on the network, it is advisory that you

also refer to the operation manual supplied with

your network component.

The input sources that can be played from Source

function are as shown below.

• BD-R/RE (BDAV format) discs

• DVD-R/RW (VR format) discs

• Audio CDs (CD-DA, SACD and DTS CDs)

• DVD/CDs on which only data files of video,

image or audio files, etc. are recorded.

•USB device

• Files on the network servers (on the PCs or

components connected to the player via LAN

interface.)

Note

•The Source function allows you to play files on

media servers connected on an identical Local

Area Network (LAN) as the receiver.

• The following files are allowed to be played

from Source function:

– PCs running Microsoft Windows 10 with

Windows Media Player 12 installed

– DLNA-compatible digital media servers (on

PCs or other components)

Files stored in a PC or DMS (Digital Media

Server) as described above can be played by

Digital Media Player (DMP). The player

supports the use of such DMP.

Files stored in a PC or DMS (Digital Media

Server) as described above can be played via

command from an external Digital Media

Controller (DMC). Devices controlled by this

DMC to play files are called DMRs (Digital

Media Renderers). This player supports this

DMR function. When in the DMR mode, such

operations as playing and stopping files can be

performed from the external controller.

• To play back audio files stored on components

on the network, you must turn on the DHCP

server function of your router. In case your

router does not have the built-in DHCP server

function, it is necessary to set up the network

manually. Otherwise, you cannot play back files

stored on components on the network. See　

Setting the IP address on page 44

About network playback

The network playback function of this unit uses the

following technologies:

❖ Windows Media Player

See Windows Media Player 12 above for more on

this.

❖ Content playable over a network

• Even when encoded in a compatible format,

some files may not play correctly.

• Some functions may not be supported

depending on the server type or version used.

• Supported file formats vary by server. As such,

files not supported by your server are not

displayed on this unit. For more information

check with the manufacturer of your server.

❖ Disclaimer for Third Party Content

Access to content provided by third parties

requires a high speed Internet connection and may

also require account registration and a paid

subscription.

Third party content services may be changed,

suspended, interrupted, or discontinued at any

time without notice, and Pioneer disclaims any

liability in connection with such occurrences.

Pioneer does not represent or warrant that

content services will continue to be provided or

available for a particular period of time, and any

such warranty, express or implied, is disclaimed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer UDP-LX800 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer UDP-LX800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info