Bedienungsanleitung Pioneer UDP-LX800 (Seite 53 von 64) (Englisch)

699669

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• No sound is output.

• Sound is not output

properly.

Is the volume set to the

minimum?

If the volume of the TV or AV amplifier is set to the minimum,

raise it.

Is the disc played back in

slow motion?

Is the disc played back in

fast forward or fast reverse?

No sound is output during slow motion play and forward and

reverse scanning.

Are the audio cables

properly connected?

• Connect the cable properly according to the connected

devices (page 16).

• Insert the cable firmly and all the way in.

• If the connection plug or terminal is dirty, wipe it clean.

Is the audio cable

damaged?

If the cable is damaged, replace it with a new one.

Is Audio Output properly

set?

Set Audio Output properly, according to the connected device

(page 40).

Are the connected

components (AV receiver or

amplifier, etc.) properly set?

Read the operating instructions for the connected

components and check the volume, input, speaker settings,

etc.

Is HDMI Audio Out

properly set?

Set HDMI Audio Out to Reencode or PCM (page 41).

Is the output video

resolution properly set?

Switch the resolution at which the video and audio are output

by pressing RESOLUTION e/r.

Is a DVI device

connected?

The sound will not be output from the HDMI OUT terminal if a

DVI device is connected. Connect the device to a DIGITAL OUT

terminal or the AUDIO OUT terminals (page 20).

• For some BDs, audio signals are only output from DIGITAL

OUT terminal or the HDMI OUT terminal.

• The sound may not be output for discs containing sound

other than audio signals or non-standard sound.

• When copy-protected discs are played, the picture or sound

may not be properly output. This is not a malfunction.

Is the HDMI Mode set

appropriately?

Set the HDMI Mode properly, according to the connected

device (page 41).

Is the DIRECT function set

to ON?

Audio output does not occur from the HDMI or DIGITAL AUDIO

OUT terminals if the DIRECT function is set to On. Turn the

DIRECT function off to output audio from the HDMI or DIGITAL

AUDIO OUT terminals (page 29).

Is the TRANSPORT

function set to ON?

If the TRANSPORT function is set to ON, audio is not output from

ANALOG AUDIO OUT

terminals. Set the TRANSPORT function to OFF

to output audio from

ANALOG AUDIO OUT

terminals (page 29).

Is a file with high transfer

rate played?

Use DVD or BD to play a file with high transfer rate, such as

WAV, FLAC or DSD on the disc.

Depending on the disc, files with high transfer rate may not be

played. In such a case, those files may be correctly played via

a USB device or network.

Left/right audio channels

are inverted or only one

side is produced.

Are the audio cables

properly connected?

Check whether the audio cables for the left and right channels

are inverted or whether the cable for one side is disconnected

(page 20).

Multi-channel sound is not

output.

Is the audio output of the

connected AV receiver or

amplifier, etc., properly set?

Read the operating instructions for the connected AV receiver

or amplifier and check the audio output settings of the AV

receiver or amplifier.

Is multi-channel sound

selected?

Use the menu screen or AUDIO to switch the disc’s sound to

multi-channel.

Noise can be heard when

outputting DTS Digital

Audio signals from the

DIGITAL OUT terminal.

Is the connected AV

receiver or amplifier

compatible with DTS

Digital Surround?

If an AV receiver or amplifier that is not compatible with DTS

Digital Surround is connected to the DIGITAL OUT terminal, set

Digital Output to PCM (page 40).

192 kHz or 96 kHz digital audio

signals cannot be output from

the

DIGITAL OUT

terminal.

• Copyright-protected audio is converted to 48 kHz or less

before output.

• Set Max Sampling Frequency to 96kHz or 192kHz (page 40).

Problem Check Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer UDP-LX800 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer UDP-LX800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info