Bedienungsanleitung Pioneer UDP-LX800 (Seite 56 von 64) (Englisch)

699669

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

The audio files stored on

components on the

network, such as a

computer, cannot be

played back.

There are cases where a component with Internet security

software installed cannot be accessed.

The audio component on

the network which has

been switched off is

switched on.

Switch on the audio component on the network before

switching on this unit.

If the client is automatically authorized, you need to enter the

corresponding information again. Check whether the

connection status is set to “Do not authorize”.

Check the audio files stored on the component connected to

the network.

Install Windows Media Player 12 on your computer.

Play back audio files recorded in MP3, WAV (LPCM only),

MPEG-4 AAC, or WMA. Note that some audio files recorded in

these formats may not be played back on this unit.

Audio files recorded in

MPEG-4 AAC are being

played back on Windows

Media Player 12.

Audio files recorded in MPEG-4 AAC cannot be played back on

Windows Media Player 12. Try using another server. Refer to

the operation manual supplied with your server.

Check whether the component is affected by special

circumstances or is in the sleep mode. Try rebooting the

component if necessary.

Try changing the settings for the component connected to the

network.

The folder stored on the

omponent connected to

the network has been

deleted or damaged.

Check the folder stored on the component connected to the

network.

The audio files stored on

components on the

network, such as a

computer, cannot be

played back.

Check the computer’s network settings, security settings, etc.

Playback does not start. The component is

currently disconnected

from this unit or the

power supply.

Check whether the component is properly connected to this

unit or the power supply.

The computer is not

properly operated.

The corresponding IP

address is not properly

set.

Switch on the built-in DHCP server function of your router, or

set up the network manually according to your network

environment.

The automatic configuration process takes time. Please wait.

Cannot access Windows

Media Player 12.

You are currently logged

onto the domain through

your computer with

Windows 10 installed.

Instead of logging onto the domain, log onto the local

machine.

Video and audio playback

are undesirably stopped

or disturbed.

Check whether the audio file was recorded in a format

supported by this unit.

Even audio files listed as playable on this unit may sometimes

not be played back or displayed.

Check whether the folder has been damaged or corrupted.

The LAN cable is

currently disconnected.

Connect the LAN cable properly.

There is heavy traffic on

the network with the

Internet being accessed

on the same network.

Use 100BASE-TX/1000BASE-T to access the components on

the network.

Problem Check Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer UDP-LX800 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer UDP-LX800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info