Bedienungsanleitung Pioneer VREC-DZ600 (Seite 26 von 39) (Englisch)

811509

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

− 26 −

English

Parking Mode

When the power supply to this product is turned off (vehicle engine is turned off, or the cigarette

lighter power cable is removed), the parking mode is activated for a fixed period of time. The maximum

operation time is approximately 90 minutes.

When this device detects vehicle movement caused by vibration while the parking mode is activated, that

event is saved for 30 seconds before and 30 seconds after the moment of detection as a parking mode

file, and a notification message is displayed at the next startup.

Notes

• The parking mode can be set to on or off.

The operation time of the parking mode can also be set.

→

“This Product Settings” - “Configurable Features”

“Parking Mode” - “Parking Mode

Video Length”

• You can adjust the sensitivity for detecting vibration.

→

“This Product Settings” - “Configurable Features”

“Parking Mode” - “G-Sensor

Sensitivity”

• Vibration that is detected for approximately three minutes after power supply to this device is

stopped and for approximately three minutes before power supply is started is not covered by the

notification message display feature.

• The recording time may differ depending on the conditions.

Security mode <RD-HWK100 (sold separately)>

If the pre-set operation time elapses when the security mode is turned ON, the security mode in which

parking surveillance is performed 24 hours per day, 365 days per year is automatically activated.

When this device detects vehicle movement caused by vibration while the security mode is activated,

that event is saved for the set normal video time after the moment of detection as a parking mode file,

and a notification message is displayed at the next startup.

Notes

• The security mode can be set to on or off.

→

“This Product Settings” - “Configurable Features” - “Parking Mode” - “Security mode”

• In the security mode, this product runs in the low power consumption mode to reduce the risk of the

battery running flat.

• When the battery voltage drops below 11.2 V, security mode standby and recording are stopped.

• The security mode starts recording within three seconds of detection of impact.

• Vibration that is detected for approximately three minutes before the vehicle’s engine is turned on

(ACC ON) is not covered by the notification message display feature.

• The security mode is a feature for starting up and activating this product after an impact is detected.

For this reason, the battery might wear more quickly if this product is used in mechanical multi-story

parking garages or location subjected to lots of vibration. When parking in locations such as these,

set the security mode to off before using this product.

• The recording time may differ depending on the conditions.

Photography Feature

Photos can be taken during video recording or event recording by pressing the function button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VREC-DZ600 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VREC-DZ600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info