Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 42 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Listening to your system

With two channel sources, press THX repeatedly to select

a matrix-decoding process for the THX CINEMA mode

(see Listening in surround sound above for an

explanation of each process):

• 2 Pro Logic IIx MOVIE

• 2 PRO LOGIC

• NEO:6 CINEMA

With multichannel sources, press THX repeatedly to

select from:

• THX CINEMA – Gives you cinema-quality sound from

your home theatre system using all the speakers in

your setup

• THX SURROUND EX – Allows you to hear 6.1 or 7.1

channel playback with 5.1 channel sources

• 2 Pro Logic IIx MOVIE – Allows you to hear 7.1

channel playback with 5.1 channel sources

(especially suited to movie sources)

• THX ULTRA2 CINEMA – Allows you to hear 7.1

channel playback with 5.1 channel sources

• THX MUSICMODE – Allows you to hear 7.1 channel

playback with DVD-A and SACD multichannel music

sources

Note

• If you only have one surround back speaker

connected, THX ULTRA2 CINEMA and THX

MUSICMODE are not available.

• When selecting the Dolby Pro Logic modes above,

the display shows the mode you selected, then after

a few seconds, shows THX CINEMA.

• You won’t be able to use the THX options when

playing two-channel DVD-A and SACD sources.

• With multichannel DVD-A and SACD sources, you

can only select THX MUSICMODE.

Listening in stereo

You can hear any source through just the front left and

right speakers (and possibly your subwoofer depending

on your speaker settings).

• While listening to a source, press STEREO for

stereo playback.

STEREO shows in the front panel display. Any active

Advanced surround or Home THX mode is canceled.

Dolby Digital and DTS multichannel sources are

downmixed to stereo.

Listening with headphones

When headphones are connected, only the STEREO

(default) and PHONES SURROUND modes are available.

PHONES SURROUND is a virtual surround sound

experience for headphones which provides realistic and

dynamic surround sound.

When you connect a pair of headphones, the listening

mode automatically changes to STEREO or PHONES

SURROUND. When you disconnect them it reverts to the

previous mode.

• With headphones connected, press STANDARD

to select PHONES SURROUND, or STEREO for stereo

sound.

You can also turn the front panel LISTENING MODE

SELECTOR dial to select either STEREO or PHONES

SURROUND.

Note

• Many features of this amplifier are not accessible

when the headphones are connected.

• If the U-shaped connectors (on the rear panel) aren’t

in place, you won’t be able to use the headphones.

• When headphones are connected, no sound is heard

from the speakers.

• If you’re listening to a WMA9 Pro format source, only

STEREO is available.

LISTENING

MODE

AMPLIFIER

AMPLIFIER 1/3

STREAM

DIRECT

ACOUSTIC

CAL.

SIGNAL

SELECT

ADVANCED

CINEMA

ADVANCED

CONCERT

STEREO

STANDARD THX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info