Bedienungsanleitung Pioneer VSA-AX10i-S (Seite 47 von 104) (Englisch)

574062

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Listening to your system

Listening with virtual surround back

speakers

• Default setting: VIRTUAL SB OFF

If you don’t have real surround back speakers connected,

you can use the Virtual Surround Back feature to

simulate one.

Sometimes the material may sound better in the 5.1

format for which it was originally encoded. In this case

you can have the amplifier only apply this effect to 6.1

encoded sources like Dolby Digital EX or DTS-ES (VSB

AUTO), or you can simply switch it off (VSB OFF).

Note that this feature only works when the surround

channels are active and the surround back speaker is set

to NO in Speaker Systems on page 52. It is also available

when the speaker system has been set to SPAB (see

Switching the speaker system on page 75).

See also Using the surround back channel above.

• Press SB CH MODE repeatedly to cycle through

the virtual surround back channel options.

The remote control menu for this step is shown below

(see note at the start of this chapter if you need help).

Each press cycles through the options as follows:

• VSB AUTO

• VSB ON

• VSB OFF

Note

• You can’t select the virtual surround back setting

when you’ve selected SPB as the speaker setting

(see Caution on page 75) or when Bi-Surround is

selected in Speaker Systems on page 52.

• You can’t use the virtual surround back setting when

Stream Direct is on or when STEREO, or one of the

THX modes is selected.

Creating a center speaker effect

If you don’t have a center speaker connected, the center

speaker channel is mixed to your two front speakers.

However, using the Real Phantom setting, you can create

a center speaker effect for an effective front surround

effect.

1 Press OPTION repeatedly to select R.PHANTOM.

The remote control menu for this step is shown below

(see note at the start of this chapter if you need help).

2 Use the (OPTION) +/– buttons to change the

setting.

• Mid – A subtle center speaker effect is applied to the

front left and right channels.

• Max – A strong center speaker effect is applied to the

front left and right channels.

• OFF – The center speaker effect is switched off.

Note

• Real Phantom is automatically switched off and

R.PHANTOM won’t appear in the display (in step 1) if

Stream Direct or the STEREO listening mode is

switched on. The center speaker must also be set to

NO in Speaker Systems on page 52.

AMPLIFIER

3/3

SB CH

MODE

INPUT

STATUS

INPUT

AT T

SPEAKER

A/B

VIDEO

SELECT

TAPE2

MONITOR

DISPLAY

DIMMER

AMPLIFIER

CONT

PHONES

SP SYSTEM

A/B

SIGNAL

SELECT

VIDEO

SELECT

TAPE2

MONITOR

STREAM

DIRECT

SETUP

MIC

SB CH

MODE

DIGITAL IN

S-VIDEO VIDEO

VIDEO INPUT

AUDIOLR

MIDNIGHT

LOUDNESS OPTIONTONE DIGITAL NR INPUT ATT

SELECT

CH LEVEL

ACOUSTIC

CAL.

AMPLIFIER

2/3

AMPLIFIER

CONT

MIDNIGHT DIGITAL NR

TONE LOUDNESS

OPTION

+–

CH LEVEL

+–

PHONES

SP SYSTEM

A/B

SIGNAL

SELECT

VIDEO

SELECT

TAPE2

MONITOR

STREAM

DIRECT

SETUP

MIC

SB CH

MODE

DIGITAL IN

S-VIDEO VIDEO

VIDEO INPUT

AUDIOLR

MIDNIGHT

LOUDNESS OPTIONTONE DIGITAL NR INPUT ATT SELECT

CH LEVEL

ACOUSTIC

CAL.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSA-AX10i-S Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSA-AX10i-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info