Bedienungsanleitung Pioneer VSX-1015TX (Seite 13 von 76) (Englisch)

574077

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

5 minute guide

Note

• If you leave an error message on the screen for over

three minutes, or if you cancel the Auto MCACC

Setup at any time, the receiver automatically exits

and no settings will be made.

• Depending on the characteristics of your room,

sometimes identical speakers with cone sizes of

around 5 inches (12cm) will end up with different size

settings. You can correct the setting manually using

the Manual speaker setup on page 45.

• The subwoofer distance setting may be farther than

the actual distance from the listening position. This

setting should be accurate (taking delay and room

characteristics into account) and generally does not

need to be changed.

• Remember to disconnect the microphone after

you’ve finished the Auto MCACC Setup.

Other problems when using the Auto MCACC

Setup

If the room environment is not optimal for the Auto

MCACC Setup (too much background noise, echo off the

walls, obstacles blocking the speakers from the

microphone) the final settings may be incorrect. Check

for household appliances (air conditioner, fridge, fan,

etc.), that may be affecting the environment and switch

them off if necessary. If there are any instructions

showing in the front panel display, please follow them.

• Some older TVs may interfere with the operation of

the microphone. If this seems to be happening,

switch off the TV when doing the Auto MCACC Setup.

Checking the settings on your DVD

(or other) player

Before continuing, you may want to check the digital

audio output settings on your DVD player and digital

satellite receiver.

• Check that your DVD player/satellite receiver is

set to output Dolby Digital, DTS and 88.2/96kHz PCM

(2 channel) audio.

If there is an option for MPEG audio, set this to convert

the MPEG audio to PCM.

If you connected the multichannel analog outputs of the

player to this receiver, make sure that the player is set to

output multichannel analog audio.

Note

• Depending on your DVD player or source discs, you

may only get digital 2 channel stereo and analog

sound. In this case, the receiver must be set to a

multichannel listening mode (see Listening in

surround sound on page 31 if you need to do this) if

you want multichannel surround sound.

Playing a source

Here are the basic instructions for playing a source (such

as a DVD disc) with your home theater system.

1 Turn on the power of the playback component

(for example a DVD player), your TV and subwoofer

(if you have one).

• If your source is the TV’s built-in tuner, then switch to

the channel you want to watch, otherwise make sure

that the TV’s video input is set to this receiver. (For

example, if you connected this receiver to the VIDEO

1 jacks on your TV, make sure that the VIDEO 1 input

is now selected.)

2 If the receiver isn’t already on, press  RECEIVER

to switch it on.

3 Change the receiver input to the source you

want to play.

You can use the front panel input select buttons or the

dedicated MULTI CONTROL buttons on the remote

control.

4 Press AUTO SURR (remote control) and start

playback of the DVD (or other component).

If you’re playing a Dolby Digital or DTS surround sound

DVD disc, you should hear surround sound. If you are

playing a stereo source, you will only hear sound from the

front left/right speakers in the default listening mode.

• See also Listening to your system on page 31 for

more information on different ways of listening to

sources.

5 Use the volume control (front panel or remote)

to adjust the volume level.

• Turn down the volume of your TV so that all the sound

is coming from the speakers connected to this

receiver.

• Adjust the volume to your liking between –80dB

(min) and +12dB (max).

Note

• If you need to manually switch the input signal type

from digital to analog (stereo or multichannel), press

SIGNAL SELECT (page 35).

• For more detailed surround sound setup, see The

System Setup menu on page 40.

VSX_1015.book.fm 13 ページ２００４年１１月２９日　月曜日　午後７時８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1015TX Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info