Bedienungsanleitung Pioneer VSX-1015TX (Seite 54 von 76) (Englisch)

574077

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Controlling the rest of your system

Erasing one of the remote control

button settings

This erases one of the buttons you have programmed and

restores the button to the factory default.

1 While pressing the RECEIVER button, press and

hold the 1 button.

The remote LCD display shows

SETUP

2 Press the MULTI CONTROL button corresponding

to the button setting to be erased.

The LCD on the remote displays the component.

3 Use

/

(cursor left/right) to select ERASE then

press ENTER.

The LCD display flashes

PRES KEY

4 Press and hold the button to be erased for two

seconds.

The LCD display shows

NO CODE

to confirm the

button has been erased.

5 Repeat step 4 to erase other buttons.

6 Press the RECEIVER button when you’re done.

Erasing all of the remote control

presets

This will erase all preset remote control preset codes and

programmed buttons.

1 While pressing the RECEIVER button, press and

hold the 1 button.

The remote LCD display shows

SETUP

2 Press the DVD/LD MULTI CONTROL button.

3 Use

/

(cursor left/right) to select RESET then

press and hold ENTER for about two seconds.

The LCD shows

to confirm the remote presets have

been erased.

Direct function

• Default setting:

You can use the direct function feature to control one

component using the remote control while at the same

time, using your receiver to playback a different

component. This could let you, for example, use the

remote control to set up and listen to a CD on the receiver

and then use the remote control to rewind a tape in your

VCR while you continue to listen to your CD player.

When direct function is on, any component you select

(using the

MULTI CONTROL

buttons) will be selected by

both the receiver and the remote control. When you turn

direct function off, you can operate the remote control

without affecting the receiver.

1 While pressing the RECEIVER button, press and

hold the 1 button.

The remote LCD display shows

SETUP

2 Press the MULTI CONTROL button for the

component you want to control.

The LCD on the remote displays the component you want

to control.

3 Use

/

(cursor left/right) to select DIRECT F

then press ENTER.

The LCD on the remote displays the component you want

to control.

4 Use

/

(cursor up/down) to switch direct

function ON or OFF then press ENTER.

The LCD shows

to confirm the setting.

Note

• You can’t use direct function with the

TV CONT

function.

Confirming preset codes

Use this feature to check which preset code is assigned

to a

MULTI CONTROL

button.

1 While pressing the RECEIVER button, press and

hold the 1 button.

The remote LCD display shows

SETUP

2 Press the MULTI CONTROL button of the

component for which you want to check the preset

code.

3 Use

/

(cursor left/right) to select READ ID

then press ENTER.

The brand name and preset code appears in the display

for three seconds.

VSX_1015.book.fm 54 ページ２００４年１１月２９日　月曜日　午後２時３８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1015TX Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info