Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 42 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

The System Setup menu

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might want to

make these settings in order.

• Fine Channel Level – Make fine adjustments to the

overall balance of your speaker system (see Fine

Channel Level on page 42).

• Fine SP Distance – Make precise delay settings for

your speaker system (see Fine Speaker Distance on

page 42).

• Standing Wave – Control overly resonant low

frequencies in your listening room (see Standing

Wave on page 43).

The last two settings are specifically for customizing the

parameters explained in Acoustic Calibration EQ Adjust

on page 43:

• EQ Adjust – Manually adjust the frequency balance

of your speaker system while listening to test tones

(see Acoustic Calibration EQ Adjust on page 43).

• EQ Professional – Calibrate your system based on

the direct sound coming from the speakers and make

detailed settings according to your room’s reverb

characteristics (see Acoustic Calibration EQ

Professional on page 44).

Fine Channel Level

•Default setting: 0.0dB (all channels)

You can achieve better surround sound by properly

adjusting the overall balance of your speaker system. The

following setting can help you make detailed

adjustments that you may not achieve using the Manual

speaker setup on page 48.

1 Select ‘

Fine Channel Level

’ from the Manual

MCACC setup menu.

The volume increases to the 0.0 dB reference level.

2 Adjust the level of the left channel.

This will be the reference speaker level, so you may want

to keep the level around 0.0dB so that you’ll have plenty

of room to adjust the other speaker levels.

• After pressing ENTER, test tones will be output.

3 Select each channel in turn and adjust the levels

(

+/–10dB)

as necessary.

Use / to adjust the volume of the speaker you

selected to match the reference speaker. When it sounds

like both tones are the same volume, press  to confirm

and continue to the next channel.

• For comparison purposes, the reference speaker will

change depending on which speaker you select.

• If you want to go back and adjust a channel, simply

use / to select it.

4 When you’re finished, press

RETURN

You will return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 10’00’’ (all speakers)

For proper sound depth and separation with your system,

it is necessary to add a slight bit of delay to some

speakers so that all sounds will arrive at the listening

position at the same time. You can adjust the distance of

each speaker in 1 inch increments. The following setting

can help you make detailed adjustments that you may

not achieve using the Manual speaker setup on page 48.

1 Select ‘

Fine SP Distance

’ from the Manual MCACC

setup menu.

2 Adjust the distance of the left channel from the

listening position.

3 Select each channel in turn and adjust the distance

as necessary.

Use / to adjust the delay of the speaker you selected

to match the reference speaker. The delay is measured in

terms of speaker distance from 0’01’’ to 45’00’’.

3.Manual MCACC

:Return

a . Fine Channel Level

b . Fine SP Distance

c . Standing Wave

d . EQ Adjust

e . EQ Professional

3a.Fine Channel Level

:Cancel

Please wait... 20

CAUTION

Loud test tones will

be output.

3a.Fine Channel Level

MCACC : M1.MEMORY 1

Ref.Ch : L

+0.5dB

ENTER:Next

:Cancel

3a.Fine Channel Level

R L

L +0.5dB

R [ -1.5dB ] SBL [ -9.5dB ]

C [ +1.0dB ] SBR [ +10.0dB ]

SL [ -9.5dB ] SW [ -1.5dB ]

SR [ +10.0dB ]

:Finish

3.Manual MCACC

:Return

a . Fine Channel Level

b . Fine SP Distance

c . Standing Wave

d . EQ Adjust

e . EQ Professional

3b.Fine SP Distance

MCACC : M1.MEMORY 1

Ref.Ch : L

10 ' 00 "

ENTER:Next

:Cancel

3b.Fine SP Distance

SL L

L 10 ' 10 "

R [ 9 ' 11 " ]

C [ 10 ' 10 " ]

SL 9 ' 08 "

SR [ 9 ' 09 " ]

:Finish

3b.Fine SP Distance

SBL SL

SBL 6 ' 02 "

SBR [ 6 ' 03 " ]

SW [ 12 ' 01 " ]

:Finish

VSX-1018AH_KU.book Page 42 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info