Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 47 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

The System Setup menu

Checking MCACC preset data

After you have completed Automatically setting up for

surround sound (Auto MCACC) on page 10 or Automatic

MCACC (Expert) on page 38, you can check your

calibrated settings using the on-screen display.

1 Select ‘

MCACC Data Check

’ from the Data

Management setup menu.

2 Select the setting you want to check.

• It is useful to do this while a source is playing so you

can compare the different settings.

3 Select the MCACC preset that you want to check.

Use / if necessary to switch speakers/settings.

4Press

RETURN

to go back to the Data Check menu,

repeating steps 2 and 3 to check other settings.

5 When you’re finished, press

RETURN

You will return to the Data Management setup menu.

Renaming MCACC presets

If you have several different MCACC presets that you’re

using, you may want to rename them for easier

identification.

1 Select ‘

Memory Rename

’ from the Data

Management setup menu.

2 Select the MCACC preset you want to rename, then

select an appropriate preset name.

Use / to select the preset, then / to select a

preset name.

3 Repeat for as many MCACC presets as necessary,

then press

RETURN

when you’re finished.

You will return to the Data Management setup menu.

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration

EQ (see Manual MCACC setup on page 41), we

recommend copying your current settings

to an unused

MCACC preset. Instead of just a flat EQ curve, this will

give you a reference point from which to start.

1Select ‘

MCACC Memory Copy

’ from the Data

Management setup menu.

2 Select the setting you want to copy.

• All Data – Copies all the settings of the selected

MCACC preset memory.

• LEVEL & DISTANCE – Copies only the channel level

and speaker distance settings of the selected

MCACC preset memory.

3 Select the MCACC preset you’ll be copying the

settings ‘

From

’, then specify where you want to copy

them (‘

’).

Make sure you don’t overwrite an MCACC preset you’re

currently using (this can’t be undone).

4Select ‘

Copy

’ to confirm and copy the settings.

Completed! shows in the OSD to confirm the MCACC

preset has been copied, then you automatically return to

the Data Management setup menu.

Clearing MCACC presets

If you are no longer using one of the MCACC presets

stored in memory, you can choose to clear the calibration

settings of that preset.

1Select ‘

MCACC Memory Clear

’ from the Data

Management setup menu.

2 Select the MCACC preset you want to clear.

Make sure you don’t clear an MCACC preset you’re

currently using (this can’t be undone).

3Select ‘

Clear

’ to confirm and clear the preset.

Completed! shows in the OSD to confirm the MCACC

preset has been cleared, then you automatically return to

the Data Management setup menu.

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename

c . MCACC Memory Copy

d . MCACC Memory Clear

4a.MCACC Data Check

:Return

1 . Speaker Setting

2 . Channel Level

3 . Speaker Distance

4 . Standing Wave

5 . Acoustic Cal EQ

ENTER:Next

4a5.EQ Data Check

125

250

500

16k

TRM

MCACC M1 63Hz 0.0

Ch [SBL] 125Hz 0.0

250Hz 0.0

500Hz 0.0

1kHz 0.0

2kHz 0.0

4kHz 0.0

8kHz 0.0

16kHz 0.0

:Return

TRIM 0.0

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename

c . MCACC Memory Copy

d . MCACC Memory Clear

4b.Memory Rename

:Finish

MCACC Position Rename

M1 MEMORY 1

M2 [ MEMORY 2 ]

M3 [ MEMORY 3 ]

M4 [ MEMORY 4 ]

M5 [ MEMORY 5 ]

M6 [ MEMORY 6 ]

Note

1 The settings made in Automatically setting up for surround sound (Auto MCACC) on page 10 or Automatic MCACC (Expert) on page 38.

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename

c . MCACC Memory Copy

d . MCACC Memory Clear

4c.MCACC Memory Copy

:Cancel

Copy

All Data

From

[ M1. MEMORY 1 ]

[ M2. MEMORY 2 ]

Start Copy

[ Cancel

]

All Data

4.Data Management

:Return

a . MCACC Data Check

b . Memory Rename

c . MCACC Memory Copy

d . MCACC Memory Clear

4d.MCACC Memory Clear

:Cancel

Clear

M1. MEMORY 1

Start Clear

[ Cancel

]

VSX-1018AH_KU.book Page 47 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info