Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 58 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Other connections

Selecting the multichannel analog inputs

If you have connected a decoder or a DVD player as

above, you must select the analog multichannel inputs

for surround sound playback.

1 Make sure you have set the playback source to the

proper output setting.

For example, you might need to set your DVD player to

output multichannel analog audio.

2 Press

MULTI CH IN

on the front panel to turn the

multi-channel input on.

• Depending on the DVD player you’re using, the

analog output level of the subwoofer channel may be

too low. In this case, the output level of the subwoofer

can be increased by 10 dB in the Multi Ch In Setup in

Other Setup. For details, see Multi Channel Input

Setup on page 69.

Speaker B setup

Caution

• Before making or changing the connections, switch off

the power and disconnect the power cord from the

power outlet. Plugging in components should be the

last connection you make with your system.

• Be careful not to allow any contact between speaker

wires from different terminals.

• You can use speakers with a nominal impedance

between 6 Ω to 16 Ω (please see Switching the

speaker impedance on page 74 if you plan to use

speakers with an impedance of less than 8 Ω).

After selecting Speaker B in Surround back speaker

setting on page 41, you can use the speakers connected

to the (surround back) B speaker terminals on the rear

panel to listen to stereo playback in another room. See

Switching the speaker system below for the listening

options with this setup.

1 Connect a pair of speakers to the surround back

speaker terminals on the rear panel.

Connect them the same way you connected your

speakers in Installing your speaker system on page 21.

Make sure to review Placing the speakers on page 22

when placing the speakers in another room.

2 Select ‘

Speaker B

’ from the Surround Back System

menu.

See Surround back speaker setting on page 41 to do this.

Switching the speaker system

If you selected Speaker B in Surround back speaker

setting on page 41, three speaker system settings are

possible using the SPEAKERS button. If you selected

Normal or Front Bi-Amp, the button will simply switch

your main speaker system on or off. The options below

are for the Speaker B setting only.

•Use the

SPEAKERS

button on the front panel to

select a speaker system setting.

As mentioned above, if you have selected Normal, the

button will simply switch your main speaker system (A)

on or off.

Press repeatedly to choose a speaker system option:

• SPA – Sound is output from speaker system A and

the same signal is output from the pre-out terminals.

• SPB – Sound is output from the two speakers

connected to speaker system B. Multichannel

sources will not be heard. The same signal is output

from the surround back channel pre-out terminals.

• SPAB – Sound is output from speaker system A (up

to 5 channels, depending on the source), the two

speakers in speaker system B, and the subwoofer.

The sound from speaker system B will be the same as

the sound from speaker system A (multichannel

sources will be downmixed to 2 channels).

Note

1 • When playback from the multichannel inputs is selected, only the volume and channel levels can be set.

• You can’t listen to your speaker B system during playback from the multichannel inputs.

• With MULTI CH IN inputs, it is possible to play pictures simultaneously. For details, see Multi Channel Input Setup on page 69.

MASTER

VOLUM E

VSX-1018AH

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

STANDARD

SURROUND

ADVANCED

SURROUND

STEREO/

A.L.C.

SPEAKERS

MCACC

SETUP MIC

iPod DIRECT

USB

DIGITAL INAUDIO RLVIDEO

VIDEO

INPUT

–

SAT DVR 1/DVR 2 VIDEO HDMI 1/HDMI 2 CD/CD-R FM/AM iPod USB MULTI CH IN

HDMI

DIGITAL PRECISION

PROCESSING

DIGITAL VIDEO

SCALER

ADVANCED

MCACC

XM/SIRIUS MULTI CH IN

MCACC

SETUP MIC

iPod DIRECT

USB

GITAL IN

iPod USB MULTI CH INSIRIUS

2 • The subwoofer output depends on the settings you made in Manual speaker setup on page 48. However, if SPB is selected above, no sound is heard

from the subwoofer (the LFE channel is not downmixed).

• Depending on the settings in Surround back speaker setting on page 41 output from the surround back pre-out terminals may change.

• All speaker systems (except Speaker B connections) are switched off when headphones are connected.

PHONES

AUTO SURR/

STREAM DIRECT

SOUND

RETRIEVER

STANDARD

SURROUND

ADVANCED

SURROUND

STEREO/

A.L.C.

SPEAKERSON/OFFCONTROL

MULTI-ZONE

MCACC

SETUP MIC

iPod DIRECT

USB

DIGITAL INAUDIO RLVIDEO

VIDEO

INPUT

–

SPEAKERS

VSX-1018AH_KU.book Page 58 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info