Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 62 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Other connections

2 Press

CONTROL

• When the receiver is on,

make sure that any

operations for the sub zone are done while ZONE 2

shows in the display. If this is not showing, the front

panel controls affect the main zone only.

3Use the

INPUT SELECTOR

dial to select the source

for the zone you have selected.

For example, ZONE 2 CD-R sends the source connected

to the CD-R inputs to the sub room (ZONE 2).

•If you select FM/AM, you can use the tuner controls

to select a preset station (see Saving station presets

on page 36 if you’re unsure how to do this).

• You can’t use the iPod USB, XM and SIRIUS Radio

functions simultaneously with using the MULTI-

ZONE feature.

4Use the

MASTER VOLUME

dial to adjust the

volume.

This is only possible if you selected the VARIABLE

volume control in ZONE Audio Setup on page 69.

5 When you’re finished, press

CONTROL

again to

return to the main zone controls.

You can also press the MULTI-ZONE ON/OFF button on

the front panel to switch off all output to the sub zone.

MULTI-ZONE remote controls

Set the MULTI-ZONE operation switch to ZONE 2 to

operate the corresponding zone.

The following table shows the possible MULTI-ZONE

remote controls:

Connecting an IR receiver

If you keep your stereo components in a closed cabinet or

shelving unit, or you wish to use the sub zone remote

control in another zone, you can use an optional IR

receiver (such as a Niles or Xantech unit) to control your

system instead of the remote sensor on the front panel of

this receiver.

1 Connect the IR receiver sensor to the

IR ZONE2 IN

jack on the rear of this receiver.

2 Connect the

IR ZONE2 IN

jack of another

component to the

IR ZONE2 OUT

jack on the rear of

this receiver to link it to the IR receiver.

Please see the manual supplied with your IR receiver for

the type of cable necessary for the connection.

• If you want to link a Pioneer component to the IR

receiver, see Operating other Pioneer components

with this receiver’s sensor on page 79 to connect to

the CONTROL jacks instead of the IR ZONE2 OUT

jack.

Note

1 If the receiver is in standby, the display is dimmed, and ZONE 2 continues to show in the display.

2 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone.

Please be careful not to change stations when recording a radio broadcast.

3 The volume levels of the main and sub zones are independent.

4 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in standby.

Button What it does

 Switches on/off power in the sub zone.

INPUT

SELECT

Use to select the input source in the sub zone.

Input

source

buttons

Use to select the input source directly (this may

not work for some functions) in the sub zone.

MASTER

VOLUME

+/–

Use to set the listening volume in the sub zone.

5 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.

• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.

• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.

DIGITAL

ASSIGNABLE

ASSIGN-

ABLE

OPTICAL

MULTI CH IN

DVD TV SAT DVR1

CON-

TROL

ZONE2

COAXIAL

HDMI

OUT

BD IN

21-

ASSIGNABLE

21-

(DVR1)

(TV SAT)

AUDIO

IN INOUT OU

VIDEO

IN INOUT OU

FRONT CENTER

SURROUND

SURROUND BACK

SUBWOOFER

(DVD)

(CD)

OUT

ZONE2

OUT

CON-

TROL

IN OUT

CONTROL

SIGNABLE

CAL

DVD

CON-

TROL

ZONE2

R2)

R1)

AT)

AUDIO

FRONT

OUT

Closet or shelving unit

Non-Pioneer

component

Pioneer

component

IR receiver

VSX-1018AH_KU.book Page 62 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info