Bedienungsanleitung Pioneer VSX-1018AH-K (Seite 86 von 100) (Englisch)

455215

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Additional information

HDMI

Symptom Remedy

The HDMI indicator blinks

continuously.

• Check all the points below.

No picture or sound. • This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-

compatible. If they are not, please connect them using the component or composite video jacks.

• Depending on the connected source component, it’s possible that it will not work with this receiver

(even if it is HDCP-compatible). In this case, connect using the component or composite video jacks

between source and receiver.

• If the problem still persists when connecting your HDMI component directly to your monitor,

please consult the component or monitor manual or contact the manufacturer for support.

• If video images do not appear on your TV or flat panel TV, try adjusting the resolution, DeepColor

or other setting for your component.

• If ‘NOT SUPPORT’ appears in the receiver’s display, try adjusting the resolution, DeepColor or

other setting for your component.

• While analog video signals are being output over HDMI, use a separate connection for audio

output.

• When this receiver reproduces MULTI CH IN audio sources with the HDMI setting set to

THROUGH, you cannot hear audio output from all channels. In this case, make a digital or analog

audio connection.

• To output signals in DeepColor, use an HDMI cable (high speed HDMI cable) to connect this

receiver to a component or TV with the DeepColor feature.

No picture. • Try changing the Resolution setting (in Setting the Video options on page 72).

No sound, or sound suddenly

ceases.

• Check that the HDMI AV setting is set to AMP/THROUGH.

• If the component is a DVI device, use a separate connection for the audio.

• If analog video is being output over HDMI, please use a separate connection for the audio.

• Check the audio output settings of the source component.

Noisy or distorted picture. • Sometimes a video deck may output a noisy video signal (during scanning, for example), or the

video quality may just be poor (with some video game units, for example). The picture quality may

also depend on the settings, etc. of your display device. Switch off the video converter and reconnect

the source and display device using the same type of connection (component or composite), then

start playback again.

• If the problem still persists when connecting your HDMI component directly to your monitor,

please consult the component or monitor manual or contact the manufacturer for support.

HDCP ERROR shows in the

display.

• Check whether or not the connected component is compatible with HDCP. If it is not compatible

with HDCP, reconnect the source device using a different type of connection (component or

composite). Some components that are compatible with HDCP still cause this message to be

displayed, but so long as there is no problem with displaying video, this is not a malfunction.

VSX-1018AH_KU.book Page 86 Monday, March 10, 2008 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1018AH-K Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1018AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info