Bedienungsanleitung Pioneer VSX-1019AH-K (Seite 53 von 128) (Englisch)

455217

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Listening to your system 06

Chapter 6:

Listening to your system

Important

• The listening modes and many features

described in this section may not be

available depending on the current source,

settings and status of the receiver.

Auto playback

There are many ways to listen back to sources

using this receiver, but for the simplest, most

direct listening option is the Auto Surround

feature. The receiver automatically detects what

kind of source you’re playing and selects

multichannel or stereo playback as necessary.

• While listening to a source, press

, then press

AUTO/ALC/DIRECT

(

AUTO SURR

ALC

STREAM DIRECT

)

for

auto playback of a source.

AUTO SURROUND shows briefly in the display

before showing the decoding or playback

format. Check the digital format indicators in

the front panel display to see how the source is

being processed.

• When listening to the FM radio, the Neural

THX feature is selected automatically (see

Using Neural THX on page 51 for more on

this).

In the Auto level control (ALC) mode, this

receiver equalizes playback sound levels.

Tip

•When an ALC is selected, the effect level

can be adjusted using the EFFECT

parameter in Setting the Audio options on

page 64.

Listening in surround sound

Using this receiver, you can listen to any

source in surround sound. However, the

options available will depend on your speaker

setup and the type of source you’re listening to.

If you connected surround back speakers, see

also Using surround back channel processing

on page 56.

Standard surround sound

The following modes provide basic surround

sound for stereo and multichannel sources.

• While listening to a source, press

, then press

STANDARD

(

STANDARD SURROUND

If necessary, press repeatedly to select a

listening mode.

•If the sour ce is Dolby Digital, DTS, or Dolby

Surround encoded, the proper decoding

format will automatically be selected and

shows in the display.

Note

1• Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see

Listening in surround sound above for more on these decoding formats).

• The Auto Surround feature is canceled if you connect headphones.

2For more options using this button, see Using Stream Direct on page 56.

RECEIVER

3 In modes that give 6.1 channel sound, the same signal is heard from both surround back speakers.

4If surround back channel processing (page 56) is switched OFF, or the surround back speakers are set to NO (this

happens automatically if the Surround back speaker setting on page 94 is set to anything but Normal), 2 Pro Logic

IIx becomes 2 Pro Logic II (5.1 channel sound).

RECEIVER

VSX-1019_KU.book 53 ページ２００９年２月１７日　火曜日　午前１１時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1019AH-K Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1019AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info