Bedienungsanleitung Pioneer VSX-1019AH-K (Seite 79 von 128) (Englisch)

455217

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

The Advanced MCACC menu 10

• Auto MCACC – The default is ALL

(recommended), but you can limit the

system calibration to only one setting (to

save time) if you want.

The available

options are ALL, Keep SP System,

Speaker Setting, Channel Level,

Speaker Distance and EQ Pro & S-Wave.

• EQ Type (only available when the Auto

MCACC Menu above is EQ Pro & S-Wave)

– This determines how the frequency

balance is adjusted.

After a single calibration is performed, each of

the following three correction curves can be

stored separately in the MCACC memory.

SYMMETRY (default) implements symmetric

correction for each pair of left and right

speakers to flatten the frequency-amplitude

characteristics. ALL CH ADJ is a ‘flat’ setting

where all the speakers are set individually so

no special weighting is given to any one

channel. FRONT ALIGN

sets all speakers in

accordance with the front speaker settings (no

equalization is applied to the front left and right

channels).

• THX Speaker (only available when the

Auto MCACC Menu above is ALL or

Speaker Setting) – Select YES if you are

using THX speakers (set all speakers to

SMALL), otherwise leave it set to NO.

• STAND.WAVE Multi-Point (only available

when the Auto MCACC Menu above is EQ

Pro & S-Wave) – In addition to

measurements at the listening position,

you can use two more reference points for

which test tones will be analyzed for

standing waves. This is useful if you want to

get a balanced ‘flat’ calibration for several

seating positions in your listening area.

Place the microphone at the reference

point indicated on-screen and note the last

microphone placement will be at your main

listening position:

3 Connect the microphone to the

MCACC

SETUP MIC

jack on the front panel.

• Push down on the PUSH OPEN tab to

access the MCACC SETUP MIC jack.

Make sure there are no obstacles between the

speakers and the microphone.

If you have a tripod, use it to place the

microphone so that it’s about ear level at your

normal listening position. Otherwise, place the

microphone at ear level using a table or a chair.

Note

1• The EQ Pro & S-Wave measurement is also taken when Keep SP System or EQ Pro & S-Wave is selected. See

Acoustic Calibration EQ Professional on page 86 for more on this.

• Either effect of Acoustic Calibration EQ Professional and Standing Wave can be switched on and off in the

respective MCACC preset. For details, see Setting the Audio options on page 64.

2The Keep SP System option allows you to calibrate your system while leaving your current speaker setting (page 95)

unchanged.

3 If you selected ALL as your Auto MCACC menu, you can specify the MCACC preset where you want to save the ALL

CH ADJ and FRONT ALIGN settings.

4 Switch the Multi-Point setting NO if you only use one listening position.

1 2

2nd reference

point

3rd reference

point

Main listening

position

MASTER

VOLUME

MCACC

SETUP

MIC

SPEAKERS

VIDEO L RAUDIO

CONTROL

MULTI-ZONE

OFF

VIDEO

INPUT

VIDEO INPUT

RL AUDIOVIDEO

iPo

iPhone

USB

MCACC

SETUP MIC

USB

iPhone

Pod

VSX-1019_KU.book 79 ページ２００９年２月１７日　火曜日　午前１１時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1019AH-K Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1019AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info