Bedienungsanleitung Pioneer VSX-1019AH-K (Seite 82 von 128) (Englisch)

455217

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

The Advanced MCACC menu10

Manual MCACC setup

You can use the settings in the Manual

MCACC setup menu to make detailed

adjustments when you’re more familiar with

the system. Before making these settings, you

should have already completed Automatically

setting up for surround sound (Auto MCACC) on

page 37.

You only need to make these settings once

(unless you change the placement of your

current speaker system or add new speakers).

CAUTION

• The test tones used in the Manual MCACC

setup are output at high volume.

Important

• You will need to first specify the MCACC

preset you want to adjust by pressing

MCACC before pressing HOME MENU

(step 2 in Making receiver settings from the

Advanced MCACC menu on page 77).

•For some of the settings below, you’ll have

to connect the setup microphone to the

front panel and place it about ear level at

your normal

lis

tening position. Press

HOME MENU to display the HOME MENU

before you connect the microphone to this

receiver. If the microphone is connected

while the HOME MENU is not being

displayed, the display will change to the

Full Auto MCACC under Advanced

MCACC.

•See Problems when using the Auto MCACC

Setup on page 39 for notes regarding high

background noise levels and other possible

interference.

•If you’re using a subwoofer, switch it on

and turn up the volume to the middle

position.

1Select ‘

Manual MCACC

’ from the

Advanced MCACC

menu.

See Making receiver settings from the Advanced

MCACC menu on page 77 if you’re not already

at this screen.

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might

want to make these settings in order.

• Fine Channel Level – Make fine

adjustments to the overall balance of your

speaker system (see Fine Channel Level on

page 83).

• Fine SP Distance – Make precise delay

settings for your speaker system (see Fine

Speaker Distance on page 83).

• Standing Wave – Control overly resonant

low frequencies in your listening room (see

Standing Wave on page 85).

The last two settings are specifically for

customizing the parameters explained in

Acoustic Calibration EQ Adjust on page 85:

• EQ Adjust – Manually adjust the frequency

balance of your speaker system while

listening to test tones (see Acoustic

alib

ration EQ Adjust on page 85).

• EQ Professional – Calibrate your system

based on the direct sound coming from the

speakers and make detailed settings

according to your room’s reverb

characteristics (see Acoustic Calibration

EQ Professional on page 86).

a. Full Auto MCACC

b. Auto MCACC

c. Manual MCACC

d. Demo

1.Advanced MCACC

A/V RECEIVER

Exit Return

1. Fine Channel Level

2. Fine SP Distance

3. Standing Wave

1c.Manual MCACC

4. EQ Adjust

5. EQ Professional

A/V RECEIVER

Exit Return

VSX-1019_KU.book 82 ページ２００９年２月１７日　火曜日　午前１１時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1019AH-K Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1019AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info