Bedienungsanleitung Pioneer VSX-1019AH-K (Seite 95 von 128) (Englisch)

455217

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

The system and the other setup 11

2 Select the surround back speaker setting.

• Normal – Select for normal home theater

use with surround back speakers in your

main (speaker system A) setup.

• Speaker B – Select to use the (surround

back) B speaker terminals to listen to

stereo playback in another room (see

Switching the speaker system on page 69).

• Front Bi-Amp – Select this setting if you’re

bi-amping your front speakers (see Bi-

amping your speakers on page 20).

• ZONE 2 – Select to use the (surround back)

B speaker terminals for an independent

system in another zone (see Using the

MULTI-ZONE controls on page 69).

3 When ‘

Setting Change?

’ is displayed,

select

Yes

If No is selected, the setting is not changed.

You will return to the Manual SP Setup menu.

Speaker Setting

Use this setting to specify your speaker

configuration (size, number of speakers and

crossover frequency)

. It is a good idea to make

sure that the settings made in Automatically

setting up for surround sound (Auto MCACC) on

page 37 are correct. Note that this setting

applies to all MCACC presets, and cannot be

set independently.

1 Select ‘

Speaker Setting

’ from the

Manual SP Setup

menu.

2 Choose the set of speakers that you want

to set, then select a speaker size.

Use / to select the size (and number) of

each of the following speakers:

• Front – Select LARGE if your front

speakers reproduce bass frequencies

effectively, or if you didn’t connect a

subwoofer. Select SMALL to send the bass

frequencies to the subwoofer.

• Center – Select LARGE if your center

speaker reproduces bass frequencies

effectively, or select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect a center

speaker, choose NO (the center channel is

sent to the front speakers).

• Surr – Select LARGE if your surround

speakers reproduce bass frequenc

ies

effectively. Select SMALL to

send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect surround

speakers choose NO (the sound of the

surround channels is sent to the front

speakers or a subwoofer).

Note

1If you’re using a THX speaker setup , set all speakers to SMALL.

2 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround

and surround back speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass

frequencies are sent to the subwoofer.

1. Surr Back System

2. Speaker Setting

3. Channel Level

4. Speaker Distance

5. X-Curve

4a.Manual SP Setup

A/V RECEIVER

Exit Return

Front : LARGE

Surr : SMALL

Center : SMALL

4a2.Speaker Setting

SB : SMALL x 2

SW : YES

X.OVER : 80Hz

A/V RECEIVER

Exit Return

VSX-1019_KU.book 95 ページ２００９年２月１７日　火曜日　午前１１時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1019AH-K Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1019AH-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info