Bedienungsanleitung Pioneer VSX-1021K (Seite 6 von 184) (Englisch, Spanisch)

455184

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

01 Before you start

These symbols are only valid

in the European Union.

K058c_A1_En

(Symbol examples for batteries)

Operating range of remote

control unit

The remote control may not work properly if:

! There are obstacles between the remote

control and the receiver’s remote sensor.

! Direct sunlight or fluorescent light is shining

onto the remote sensor.

! The receiver is located near a device that is

emitting infrared rays.

! The receiver is operated simultaneously with

another infrared remote control unit.

30°

7 m (23 ft.)

Canceling the demo display

On this receiver, the demo mode is turned on by

default. When the power is turned on, the demo

display is set and various indications are shown

on the front panel display. To cancel the demo

display, connect the power cord, then perform

the operation below.

! The demo mode is canceled automatically

when the Full Auto MCACC operation is

performed.

1 Switch the receiver into standby.

2 While holding down ENTER on the

front panel, press u STANDBY/ON.

The display shows RESET c NO d.

3 Select ‘FL DEMO’ using TUNE i/j.

4 Use PRESET k/l to select FL DEMO

c OFF d then press ENTER on the front

panel.

About operation of the

receiver with a mobile

terminal (iPod, iPhone, etc.)

The receiver can be controlled from the mobile

terminal by installing a special application on

the mobile terminal. For details, see the product

information on the Pioneer website.

This special application may be changed or

discontinued without notice.

About using AVNavigator

(included CD-ROM)

The included AVNavigator CD-ROM contains

Wiring Navi allowing you to easily make the

receiver’s connections and initial settings in

dialog fashion. High precision initial settings

can be completed easily simply by following the

instructions on the screen to make the connec-

tions and settings.

There are also other features enabling easy use

of various functions, including an Interactive

Manual that operates in association with the

receiver, updating of various types of software,

and MCACC Application that lets you check the

MCACC measurement results on 3D graphs.

Before you start

Checking what’s in the box

Please check that you’ve received the following

supplied accessories:

! Setup microphone (cable: 5 m (16.4 ft.))

! Remote control unit

! AAA size IEC R03 dry cell batteries (to confirm

system operation) x2

! AM loop antenna

! FM wire antenna

! iPod cable

! CD-ROM (AVNavigator)

! These operating instructions

Installing the receiver

! When installing this unit, make sure to put it

on a level and stable surface.

! Don’t install it on the following places:

— on a color TV (the screen may distort)

— near a cassette deck (or close to a device that

gives off a magnetic field). This may interfere

with the sound.

— in direct sunlight

— in damp or wet areas

— in extremely hot or cold areas

— in places where there is vibration or other

movement

— in places that are very dusty

— in places that have hot fumes or oils (such as

a kitchen)

! Do not touch this receiver’s bottom panel

while the power is on or just after it is turned

off. The bottom panel becomes hot when the

power is on (or right after it is turned off) and

could cause burns.

Loading the batteries

The batteries included with the unit are to check

initial operations; they may not last over a long

period. We recommend using alkaline batteries

that have a longer life.

WARNING

! Do not use or store batteries in direct sunlight

or other excessively hot place, such as inside a

car or near a heater. This can cause batteries

to leak, overheat, explode or catch fire. It

can also reduce the life or performance of

batteries.

CAUTION

Incorrect use of batteries may result in such

hazards as leakage and bursting. Observe the

following precautions:

! Never use new and old batteries together.

! Insert the plus and minus sides of the

batteries properly according to the marks in

the battery case.

! Batteries with the same shape may have

different voltages. Do not use different

batteries together.

! When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules that

apply in your country or area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1021K Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1021K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info