Bedienungsanleitung Pioneer VSX-1021K (Seite 36 von 184) (Englisch, Spanisch)

455184

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

to PURE DIRECT. With DIRECT, the only

modifications added to PURE DIRECT

playback are calibration of the sound field by

the MCACC system and the Phase Control

effect.

! PURE DIRECT – Plays back unmodified

sound from source with only minimal digital

treatment. No sound is output from the

Speaker B in this mode.

Note

! When listening through headphones, you can

select ALC or PURE DIRECT mode only.

Selecting MCACC presets

! Default setting: MEMORY 1

If you have calibrated your system for different

listening positions, you can switch between set-

tings to suit the kind of source you’re listening

to and where you’re sitting (for example, watch-

ing movies from a sofa, or playing a video game

close to the TV).

1 Press to the receiver operation

mode.

2 While listening to a source, press

MCACC.

Press repeatedly to select one of the six MCACC

presets. See Data Management on page 63 to

check and manage your current settings.

! These settings have no effect when

headphones are connected.

! You can also press k/l to select the

MCACC preset.

Choosing the input signal

On this receiver, it is possible to switch

the input signals for the different inputs as

described below.

! This receiver can only play back Dolby Digital,

PCM (32 kHz to 192 kHz) and DTS (including

DTS 96/24) digital signal formats. The

compatible signals via the HDMI terminals

are: Dolby Digital, DTS, PCM (32 kHz to 192

kHz), Dolby TrueHD, Dolby Digital Plus, DTS-

EXPRESS, DTS-HD Master Audio and SACD.

! You may get digital noise when an LD, CD,

DVD or BD player compatible with DTS is

playing an analog signal. To prevent noise,

make the proper digital connections (page 15)

and set the signal input to DIGITAL.

! Some DVD players don’t output DTS signals.

For more details, refer to the instruction

manual supplied with your DVD player.

1 Press to the receiver operation

mode.

2 Press SIGNAL SEL to select the input

signal corresponding to the source

component.

Each press cycles through the options as

follows:

! AUTO – The receiver selects the first

available signal in the following order: HDMI;

DIGITAL; ANALOG.

! ANALOG – Selects an analog signal.

! DIGITAL – Selects an optical or coaxial

digital signal.

! HDMI – Selects an HDMI signal.

— When the HDMI audio output parameter

is set to THROUGH, the sound will be

heard through your TV, not from this

receiver.

When set to DIGITAL, HDMI or AUTO (only

selected DIGITAL or HDMI), the indicators light

according to the signal being decoded (see

Display on page 9 ).

06 Listening to your system

! SCI-FI – Designed for science fiction with lots

of special effects

! MONO FILM – Creates surround sound from

mono soundtracks

! ENT.SHOW – Suitable for musical sources

! EXPANDED – Creates an extra wide stereo

field

! TV SURROUND – Provides surround sound

for both mono and stereo TV sources

! ADVANCED GAME – Suitable for video

games

! SPORTS – Suitable for sports programs

! CLASSICAL – Gives a large concert hall-type

sound

! ROCK/POP – Creates a live concert sound for

rock and/or pop music

! UNPLUGGED – Suitable for acoustic music

sources

! EXT.STEREO – Gives multichannel sound to a

stereo source, using all of your speakers

! F.S.SURR FOCUS – Use to provide a rich

surround sound effect directed to the center of

where the front left and right speakers sound

projection area converges.

! F.S.SURR WIDE – Use to provide a surround

sound effect to a wider area than FOCUS

mode.

FOCUS position

(Recommended)

WIDE position

Front left

speaker

Front right

speaker

Front left

speaker

Front right

speaker

! SOUND RETRIEVER AIR – Suitable for

listening to the sound from a Bluetooth

wireless technology device. The

SOUND RETRIEVER AIR listening mode can

only selected when the ADAPTER PORT input

or listening through headphones.

! PHONES SURR – When listening through

headphones, you can still get the effect of

overall surround.

Note

! When an Advanced Surround listening mode

is selected, the effect level can be adjusted

using the EFFECT parameter in Setting the

Audio options on page 46 .

However, with F.S.SURR FOCUS,

F.S.SURR WIDE and SOUND RETRIEVER AIR,

the effect level cannot be adjusted.

! The Front Stage Surround Advance

(F.S.SURR FOCUS and F.S.SURR WIDE)

function allows you to create natural surround

sound effects using just the front speakers

and the subwoofer.

Using Stream Direct

Use the Stream Direct modes when you want

to hear the truest possible reproduction of a

source. All unnecessary signal processing is

bypassed, and you’re left with the pure analog

or digital sound source.

Processing differs depending on the input sig-

nal and whether or not surround back speakers

are connected. For details, see Auto Surround,

ALC and Stream Direct with different input signal

formats on page 82 .

% While listening to a source,

press AUTO/ALC/DIRECT

(AUTO SURR/ALC/STREAM DIRECT) to

select the mode you want.

Check the digital format indicators in the front

panel display to see how the source is being

processed.

! AUTO SURROUND – See Auto playback on

page 35 .

! ALC – Listening in Auto level control mode

(page 35).

! DIRECT – Plays back sound from the

source with the least modification next

Pioneer VSX-1021K Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1021K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info