Bedienungsanleitung Pioneer VSX-1021K (Seite 10 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

455184

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

02 Connecting your equipment

! If you connect a component that

is not compatible with HDCP, an

HDCP ERROR message is displayed on the

front panel display. Some components that

are compatible with HDCP still cause this

message to be displayed, but so long as there

is no problem with displaying video this is not

a malfunction.

! Depending on the component you have

connected, using a DVI connection may result

in unreliable signal transfers.

! This receiver supports SACD, Dolby Digital

Plus, Dolby TrueHD and DTS-HD Master

Audio. To take advantage of these formats,

however, make sure that the component

connected to this receiver also supports the

corresponding format.

! Use a High Speed HDMI

cable. If an HDMI

cable other than a High Speed HDMI

cable is

used, it may not work properly.

! When an HDMI cable with a built-in equalizer

is connected, it may not operate properly.

! Signal transfer is only possible when

connected to a compatible component.

! HDMI format digital audio transmissions

require a longer time to be recognized. Due to

this, interruption in the audio may occur when

switching between audio formats or beginning

playback.

! Turning on/off the device connected to this

unit’s HDMI OUT terminal during playback,

or disconnecting/connecting the HDMI

cable during playback, may cause noise or

interrupted audio.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI Licensing, LLC in the

United States and other countries.

“x.v.Color” and are trade-

marks of Sony Corporation.

VIDEO IN

VIDEO

MONITOR OUT

COMPONENT

VIDEO IN

Y P

COMPONENT VIDEO

MONITOR OUT

HDMI IN HDMI OUT

High picture quality

Video signals can be output

Terminal for connection with

source device

Terminal for connection

with TV monitor

Note

! If the video signal does not appear on your

TV, try adjusting the resolution settings on

your component or display. Note that some

components (such as video game units) have

resolutions that may not be converted. In this

case, try switching Digital Video Conversion

(in Setting the Video options on Operating

Instructions in CD-ROM) OFF.

! The signal input resolutions that can be

converted from the component video input

for the HDMI output are 480i/576i, 480p/576p,

720p and 1080i. 1080p signals cannot be

converted.

! Only signals with an input resolution

of 480i/576i can be converted from the

component video input for the composite

MONITOR OUT terminals.

This item incorporates copy protection technol-

ogy that is protected by U.S. patents and other

intellectual property rights of Rovi Corporation.

Reverse engineering and disassembly are

prohibited.

About HDMI

The HDMI connection transfers uncompressed

digital video, as well as almost every kind of

digital audio.

This receiver incorporates High-Definition

Multimedia Interface (HDMI

) technology.

This receiver supports the functions described

below through HDMI connections.

! Digital transfer of uncompressed video

(contents protected by HDCP (1080p/24,

1080p/60, etc.))

! 3D signal transfer

! Deep Color signal transfer

! x.v.Color signal transfer

! ARC (Audio Return Channel)

! Input of multi-channel linear PCM digital

audio signals (192 kHz or less) for up to 8

channels

! Input of the following digital audio formats:

— Dolby Digital, Dolby Digital Plus, DTS, High

bitrate audio (Dolby TrueHD, DTS-HD Master

Audio, DTS-HD High Resolution Audio),

DVD-Audio, CD, SACD (DSD signal), Video

CD, Super VCD

! Synchronized operation with components

using the Control with HDMI function (see

Control with HDMI function on Operating

Instructions in CD-ROM)

Note

! An HDMI connection can only be made

with DVI-equipped components compatible

with both DVI and High Bandwidth Digital

Content Protection (HDCP). If you choose to

connect to a DVI connector, you will need a

separate adaptor (DVIdHDMI) to do so. A DVI

connection, however, does not support audio

signals. Consult your local audio dealer for

more information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1021K Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1021K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info