Bedienungsanleitung Pioneer VSX-1022-K (Seite 48 von 65) (Englisch)

574081

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Home Menu

Channel Level

Using the channel level settings, you can adjust the overall

balance of your speaker system, an important factor when

setting up a home theater system.

CAUTION

•

The test tones used in the Channel Level settings are output

at high volume.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Channel Level’ from the Manual SP Setup menu.

Select a setup option.

•

Manual – Move the test tone manually from speaker to

speaker and adjust individual channel levels.

•

Auto – Adjust channel levels as the test tone moves

from speaker to speaker automatically.

Confirm your selected setup option.

The test tones will start after you press

ENTER

. After the

volume increases to the reference level, test tones will be

output.

Adjust the level of each channel using

/

If you selected Manual, use

/

to switch speakers. The

Auto setup will output test tones in the order shown on-

screen:

Adjust the level of each speaker as the test tone is

emitted.

Note

•

If you are using a Sound Pressure Level (SPL) meter, take

the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow

reading).

•

The subwoofer test tone is output at low volumes. You may

need to adjust the level after testing with an actual

soundtrack.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Tip

•

You can change the channel levels at any time by press

, then press

CH SELECT

and

LEV +/–

on the

remote control. You can also press

CH SELECT

and use

/



to select the channel, and then use

/

to adjust the

channel levels.

Speaker Distance

For good sound depth and separation from your system, you

need to specify the distance of your speakers from the

listening position. The receiver can then add the proper delay

needed for effective surround sound.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Speaker Distance’ from the Manual SP Setup

menu.

Adjust the distance of each speaker using

/

You can adjust the distance of each speaker in 0.1 feet

increments.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

. Manual SP Setup

Return

. Speaker Setting

. X.Over

. Channel Level

. Speaker Distance

. Channel Level

ENTER:Next

Return

Test Tone Manual

. Channel Level

Please Wait . . .20

Caution

Loud test tones

will be output.

Return

Test Tone [ Manual ]

. Channel Level

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 0dB ]

[

–

– ]

[

–

– ]

[ 0dB ]

0dB

RECEIVER

. Manual SP Setup

Return

. Speaker Setting

. X.Over

. Channel Level

. Speaker Distance

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 10.0 ft ]

[ –

–

– ]

[ –

–

– ]

[ 10.0 ft ]

10.0 ft

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1022-K Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1022-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info