Bedienungsanleitung Pioneer VSX-1022-K (Seite 61 von 65) (Englisch)

574081

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Additional information

 Network connections could be restricted due to the

computer’s network settings, security settings, etc. Check the

computer’s network settings, security settings, etc.

 Cannot access the component connected to the network.

 The component connected to the network is not properly set. If

the client is automatically authorized, you need to enter the

corresponding information again. Check whether the

connection status is set to “Do not authorize”.

 There are no playable audio files on the component connected

to the network. Check the audio files stored on the component

connected to the network.

 Audio playback is undesirably stopped or disturbed.

 The audio file currently being played back was not recorded in

a format playable on this receiver.

Check whether the audio file was recorded in a format

supported by this receiver.

Check whether the folder has been damaged or corrupted.

Note that there are cases where even the audio files listed as

playable on this receiver cannot be played back or displayed

(page 45).

 The LAN cable is currently disconnected. Connect the LAN

cable properly (page 20).

 There is heavy traffic on the network with the Internet being

accessed on the same network. Use 100BASE-TX to access the

components on the network.

 When in the DMR mode, depending on the external controller

being used, playback may be interrupted when a volume

operation is performed from the controller. In this case, adjust

the volume from the receiver or remote control.

 Cannot access Windows Media Player 11 or Windows

Media Player 12.

 In case of Windows Media Player 11: You are currently logged

onto the domain through your PC with Windows XP or

Windows Vista installed. Instead of logging onto the domain,

log onto the local machine (page 39).

 In case of Windows Media Player 12: You are currently logged

onto the domain through your PC with Windows 7 installed.

Instead of logging onto the domain, log onto the local machine

(page 39).

 Cannot listen to Internet radio stations.

 The firewall settings for components on the network are

currently in operation. Check the firewall settings for

components on the network.

 You are currently disconnected from the Internet. Check the

connection settings for components on the network, and

consult with your network service provider if necessary

(page 41).

 The broadcasts from an Internet radio station are stopped or

interrupted. There are cases where you cannot listen to some

Internet radio stations even when they are listed in the list of

Internet radio stations on this receiver (page 39).

 The NETWORK function cannot be operated with the

buttons on the remote control.

 The remote control is not currently set to the NETWORK mode.

Press

NETWORK

to set the remote control to the NETWORK

mode (page 43).

HDMI

 No picture or sound.

 If the problem still persists when connecting your HDMI

component directly to your monitor, please consult the

component or monitor manual or contact the manufacturer for

support.

 No picture.

 VSX-822 only: Video signals that are input from the analog video

terminal will not output from the HDMI terminal. Signals that

are input from the HDMI terminal will not output from the

analog video terminal. Be consistent with the type of cable

between input and output.

 Depending in the output settings of the source component, it

may be outputting a video format that can’t be displayed.

Change the output settings of the source, or connect using the

composite video jacks.

 This receiver is HDCP-compatible. Check that the components

you are connecting are also HDCP-compatible. If they are not,

please connect them using the composite video jacks.

 Depending on the connected source component, it’s possible

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video

jacks between source and receiver.

 If video images do not appear on your TV, try adjusting the

resolution, Deep Color or other setting for your component.

 To output signals in Deep Color, use an HDMI cable (High

Speed HDMI

Cable) to connect this receiver to a component

or TV with the Deep Color feature.

 No sound, or sound suddenly ceases.

 Check that the HDMI setting is set to AMP (page 36).

 If the component is a DVI device, use a separate connection for

the audio.

 HDMI format digital audio transmissions require a longer time

to be recognized. Due to this, interruption in the audio may

occur when switching between audio formats or beginning

playback.

 Turning on/off the device connected to this unit’s HDMI OUT

terminal during playback, or disconnecting/connecting the

HDMI cable during playback, may cause noise or interrupted

audio.

 Synchronized operation not possible using Control with

HDMI function.

 Check the HDMI connections.

 The cable may be damaged.

 Select ON for the Control with HDMI setting (see HDMI Setup

on page 52).

 Turn the TV’s power on before turning on this receiver’s power.

 Set the TV side Control with HDMI setting to on (see TV’s

operating instructions).

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI

signals through this receiver (this depends on the HDMI

equipped component you are connecting-check with the

manufacturer for HDMI compatibility information).

If you aren’t receiving HDMI signals properly through this

receiver (from your component), please try the following

configuration when connecting up.

Configuration A

Connect your HDMI-equipped component directly to the

display using an HDMI cable. Then use the most convenient

connection (digital is recommended) for sending audio to the

receiver. See the operating instructions for more on audio

connections. Set the display volume to minimum when using

this configuration.

Note

•

Depending on the component, audio output may be limited

to the number of channels available from the connected

display unit (for example audio output is reduced to 2

channels for a monitor with stereo audio limitations).

Pioneer VSX-1022-K Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1022-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info