Bedienungsanleitung Pioneer VSX-1023-K (Seite 15 von 68) (Englisch)

574083

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Connecting your equipment

Switching the speaker terminal

VSX-1023: When the The Speaker System setting (VSX-1023

only) on page 52 is set to SPB, each press of the speaker

button will switch the speaker used for playback: SP, SPA,

SPB, SPAB.

VSX-823: Each press of the speaker button will switch the

speaker used for playback: SP, SPA.

When the speaker system is set to SP-B: Each press of the

speaker button will switch the speaker used for playback: OFF,

A, B, AB.

When the speaker system is set to anything other than SP-B:

Each press of the speaker button will switch the speaker used

for playback: OFF, A. For more details on the speaker system

please refer to The Speaker System setting (VSX-1023 only)

page 52.

Press repeatedly to choose a speaker terminal option:

•

SPA – Sound is output from the speakers connected to

the A-speaker terminals (multichannel playback is

possible).

•

SPB (VSX-1023 only) – Sound is output from the two

speakers connected to the B-speaker terminals (only stereo

playback is possible).

•

SPAB (VSX-1023 only) – Sound is output from the A-

speaker terminals, the two speakers in the B-speaker

terminals, and the subwoofer. Multichannel sources are

downmixed only when the STEREO or STEREO ALC mode

is selected for stereo output from A- and B-speaker

terminals.

•

SP – No sound is output from the speakers.

Note

•

VSX-1023 only: The subwoofer output depends on the

settings you made in Speaker Setting

on page 49. However,

if SPB is selected above, no sound is heard from the

subwoofer (the LFE channel is not downmixed).

•

All speaker terminals are switched off (SP) when

headphones are connected. SPB can be selected even

when headphones are connected for VSX-1023.

Making cable connections

Make sure not to bend the cables over the top of this unit (as

shown in the illustration). If this happens, the magnetic field

produced by the transformers in this unit may cause a

humming noise from the speakers.

Important

•

Before making or changing connections, switch off the

power and disconnect the power cord from the AC outlet.

•

Before unplugging the power cord, switch the power into

standby.

HDMI cables

Both video and sound signals can be transmitted

simultaneously with one cable. If connecting the player and

the TV via this receiver, for both connections, use HDMI

cables.

Be careful to connect the terminal in the proper direction.

Note

•

Set the HDMI parameter in Setting the Audio options on

page 37 to THRU (THROUGH) and set the input signal in

Selecting the audio input signal

on page 25 to HDMI, if you

want to hear HDMI audio output from your TV (no sound

will be heard from this receiver).

•

If the video signal does not appear on your TV, try adjusting

the resolution settings on your component or display. Note

that some components (such as video game units) have

resolutions that may not be displayed. In this case, use a

(analog) composite connection.

•

When the video signal from the HDMI is 480i, 480p, 576i or

576p, Multi Ch PCM sound and HD sound cannot be

received.

About HDMI

The HDMI connection transfers uncompressed digital video,

as well as almost every kind of digital audio that the

connected component is compatible with, including DVD-

Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD,

DTS-HD Master Audio (see below for limitations), Video CD/

Super VCD and CD.

This receiver incorporates High-Definition Multimedia

Interface (HDMI

) technology.

This receiver supports the functions described below through

HDMI connections.

•

Digital transfer of uncompressed video (contents protected

by HDCP (1080p/24, 1080p/60, etc.))

•

3D signal transfer

•

Deep Color signal transfer

•

x.v.Color signal transfer

•

Audio Return Channel

•

Input of multi-channel linear PCM digital audio signals

(192 kHz or less) for up to 8 channels

•

Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio

(Dolby TrueHD, DTS-HD Master Audio), DVD-Audio, CD,

SACD (DSD 2 ch only), Video CD, Super VCD

•

Synchronized operation with components using the

Control with HDMI function (see Control with HDMI

function on page 55)

•

4K signal transfer

– This may not operate properly, depending on the

connected equipment.

– 4K 24p, 4K 25p and 4K 30p signals are supported

Note

•

Use a High Speed HDMI

®/

™ Cable. If HDMI cable other

than a High Speed HDMI

/™ Cable is used, it may not work

properly.

•

When an HDMI cable with a built-in equalizer is connected,

it may not operate properly.

HDMI

VSX-1023_823_UCSMXCN_En.book 15 ページ２０１２年１２月１８日　火曜日　午前１１時７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1023-K Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1023-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info