Bedienungsanleitung Pioneer VSX-1024 (Seite 25 von 69) (Englisch)

548143

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

Connecting your equipment

Connecting a MHL-compatible device

An MHL-compatible mobile device can be connected to enjoy

full-HD videos, high quality multi-channel audio, and photos

etc., with charge the battery on the receiver. Use the MHL

cable (sold separately) to connect the device.



Switch the receiver into standby then use the MHL cable

(sold separately) to connect your MHL enabled device to

the MHL terminal on the front panel of this receiver.

•

The MHL-compatible device is recharged whenever it is

connected to this unit. (Recharging is enabled only when

the unit’s power is turned on.)

•

For instructions on playing the MHL-compatible device, see

Playing a MHL-compatible device

on page 33.

Note

•

Do not place the MHL device on this unit which has the

power turned ON.

Enjoy Roku video streaming service

Connect the Roku Streaming Stick (sold separately) to the

MHL

terminal on the receiver to enjoy video streaming, see

Enjoy Roku video streaming service

on page 33.

•

When the Roku Streaming Stick (sold separately) is

connected to the receiver via the MHL terminal, and the

power switched on for the first time, a setup screen will be

displayed. Setup can be changed later on as well, see Setup

ROKU standby mode on page 56.

•

When the Roku Streaming Stick (sold separately) is

inserted, the unit will switch to MHL input.

Connecting an HDMI-equipped component to

the front panel input

Plugging in the receiver

Only plug in after you have connected all your components to

this receiver, including the speakers.



Plug the AC power cord into a convenient AC power

outlet.

CAUTION

•

Handle the power cord by the plug. Do not pull out the plug

by tugging the cord and never touch the power cord when

your hands are wet as this could cause a short circuit or

electric shock. Do not place the unit, a piece of furniture,

etc., on the power cord, or pinch the cord. Never make a

knot in the cord or tie it with other cords. The power cords

should be routed such that they are not likely to be stepped

on. A damaged power cord can cause a fire or give you an

electrical shock. Check the power cord once in a while.

When you find it damaged, ask your nearest PIONEER

authorized service center or your dealer for a replacement.

•

The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular use,

e.g., when on vacation.

Note

•

After this receiver is connected to an AC outlet, a 2 second

to 10 second HDMI initialization process begins. You

cannot carry out any operations during this process. The

HDMI indicator in the front panel display blinks during this

process, and you can turn on this receiver once it has

stopped blinking. When you set the Control with HDMI to

OFF, you can skip this process. For details about the

Control with HDMI feature, see HDMI Setup

on page 59.

MHL-compatible

device

MHL cable (sold

separately)

Video camera (etc.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1024 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info