Bedienungsanleitung Pioneer VSX-1122K (Seite 19 von 107) (Englisch)

491802

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Connecting your equipment

Connecting the speakers

Each speaker connection on the receiver comprises a positive (+) and negative (–) terminal. Make sure to match

these up with the terminals on the speakers themselves.

This unit supports speakers with a nominal impedance of 6 W to 16 W.

CAUTION

! These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when con-

necting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated

parts.

! Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any

of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.

Bare wire connections

CAUTION

Make sure that all speakers are securely installed. This not only improves sound quality, but also reduces the risk

of damage or injury resulting from speakers being knocked over or falling in the event of external shocks such as

earthquakes.

1 Twist exposed wire strands together.

2 Loosen terminal and insert exposed wire.

3 Tighten terminal.

123

10 mm (

in.)

Note

! Please refer to the manual that came with your speakers for details on how to connect the other end of the

speaker cables to your speakers.

! Use an RCA cable to connect the subwoofer. It is not possible to connect using speaker cables.

! If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal.

Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction. In this

case, the same sound is output from the two subwoofers.

Banana plug connections

If you want to use speaker cables terminated with banana plugs, screw the speaker terminal fully shut, then plug

the banana plug into the end of the speaker terminal.

Installing your speaker system

At the very least, front left and right speakers only are necessary. Note that your main surround speakers should

always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-

nected to the left surround back terminal).

Standard surround connection

PRE OUT

SPEAKERS

FRONT HEIGHT / WIDE /

SURROUND BACK / ZONE 2

SURROUNDCENTERFRONT

RLRLRLRL

(

Single

)

SUB

WOOFER

FRONT HEIGHT / WIDE /

SURROUND BACK / ZONE 2

SURROUNDCENTERFRONT

RLRLRLRL

(

Single

)

PRE OUT

SUB

WOOFER

LINE LEVEL

INPUT

LINE LEVEL

INPUT

The front height terminals can also be used for the front wide and Speaker B speakers.

Front height setting

Front height right Front height left

Front wide setting

Front wide right Front wide left

Speaker B setting

Speaker B - right Speaker B - left

Front right Center Subwoofer 2Subwoofer

ront left

The surround back terminals can also be used for ZONE 2.

Surround left

5.2 ch surround setting

Not connected Not connected

6.2 ch surround setting

Not connected Surround back

7.2 ch surround setting

Surround back right Surround back left

ZONE 2 setting

ZONE 2 - Right ZONE 2 - Left

Surround right

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1122K Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1122K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info