Bedienungsanleitung Pioneer VSX-1123-K (Seite 99 von 113) (Englisch)

574087

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

FAQ

Symptoms Causes Remedies

Network connections

cannot be made via the

wireless LAN converter

(AS-WL300).

— For details, see Wireless LAN on page 99.

Web Control

Symptoms Causes Remedies

Web Control screen is not

displayed on browser.

This receiver’s IP address has not

been entered into the browser cor-

rectly.

Check the receiver’s IP address and enter it correctly in the

browser (page 86).

Receiver settings cannot be

made from a browser.

JavaScript is disabled on the internet

browser.

Enable JavaScript.

The browser is not compatible with

JavaScript.

Use an internet browser that is compatible with JavaScript.

Wireless LAN

Network cannot be accessed via wireless LAN.

Wireless LAN converter’s power is not on. (Wireless LAN converter’s “Power”, “WPS” and “Wireless” indica-

tors are not all lit.)

! Check that the USB cable connecting the wireless LAN converter to the receiver’s DC OUTPUT for

WIRELESS LAN terminal is properly connected.

WLAN POW ERR is displayed on the receiver’s display window.

! There is a problem with the wireless LAN converter’s power supply. Turn the receiver’s power off, then

disconnect the USB cable, reconnect the USB cable and turn the receiver’s power back on.

! If WLAN POW ERR is still displayed after repeating the above procedure several times, there is a problem

with the receiver or the USB cable. Unplug the receiver from the wall and call a Pioneer authorized inde-

pendent service company.

The LAN cable is not firmly connected.

! Firmly connect the LAN cable (page 33).

Wireless LAN converter and base unit (wireless LAN router, etc.) are too far apart or there is an obstacle

between them.

! Improve the wireless LAN environment by moving the wireless LAN converter and base unit closer

together, etc.

There is a microwave oven or other device generating electromagnetic waves near the wireless LAN

environment.

! Use the system in a place away from microwave ovens or others device generating electromagnetic

waves.

! Avoid using devices generating electromagnetic waves as much as possible when using the system with

the wireless LAN.

Multiple wireless LAN converters are connected to the wireless LAN router.

! When connecting multiple wireless LAN converters, their IP addresses must be changed.

Wireless LAN connections cannot be established between the wireless LAN converter and base unit (wireless

LAN router, etc.).

! The wireless LAN converter must be set in order to establish wireless LAN connections. For details, see

the CD-ROM included with the wireless LAN converter.

The IP address settings of the receiver and wireless LAN converter do not match the settings of the wireless

LAN router, etc.

! Check the IP address settings of the receiver and wireless LAN converter (including the DHCP setting).

If the receiver’s DHCP setting is “ON”, turn the receiver’s power off, then turn the power back on.

Check that the IP addresses of the receiver and wireless LAN converter match the settings of the wireless

LAN router, etc.

If the receiver’s DHCP setting is “OFF”, set an IP address matching the network of the base unit (wireless

LAN router, etc.).

For example, if the wireless LAN router’s IP address is “192.168.1.1”, set the receiver’s IP address to

“192.168.1.XXX” (*1), the subnet mask to “255.255.255.0”, the gateway and DNS to “192.168.1.1”.

Next, set the wireless LAN converter’s IP address to “192.168.1.249” (*2).

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and 248 that is not assigned to other devices.

(*2) Set the “249” in “192.168.1.249” to a number between 2 and 249 that is not assigned to other devices.

Try making the wireless LAN converter’s advanced settings.

! The wireless LAN converter can be connected to a computer to make the advanced wireless LAN settings.

For details, see the CD-ROM included for the wireless LAN converter. Check the settings of the wireless

LAN router, etc., then change the settings of the wireless LAN converter.

Note, however, that making the advanced wireless LAN settings will not necessarily improve the wireless

LAN environment. Be careful when changing the settings.

The access point is set to conceal the SSID.

! In this case, the SSID may not be displayed on the access point list screen. If not, set the SSID, etc., by

making the wireless LAN converter settings on the receiver manually.

The access point’s security settings use WEP 152-bit length code key or shared key authentication.

! The receiver does not support WEP 152-bit length code key or shared key authentication.

Network connections cannot be established even when the above measures are taken.

! Reset the wireless LAN converter. After this, redo the wireless LAN converter’s settings.

About resetting

1. Check that the wireless LAN converter’s power is on.

2. Press the wireless LAN converter’s reset button for at least 3 seconds.

3. Release the reset button.

When the wireless LAN converter is restarted, the resetting procedure is completed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1123-K Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1123-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info