Bedienungsanleitung Pioneer VSX-1123 (Seite 51 von 115) (Englisch)

536829

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Listening to your system

Selecting MCACC presets

! Default setting: MEMORY 1

If you have calibrated your system for different listening positions, you can switch between settings to suit the

kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a

video game close to the TV).

1 Press to the receiver operation mode.

2 While listening to a source, press MCACC.

Press repeatedly to select one of the six MCACC presets. See Data Management on page 81 to check and man-

age your current settings.

! These settings have no effect when headphones are connected.

! You can also press k/l to select the MCACC preset.

Choosing the input signal

On this receiver, it is possible to switch the input signals for the different inputs as described below.

! This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz) and DTS (including DTS 96/24) digital

signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, PCM (32 kHz to 192

kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD.

! You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal.

To prevent noise, make the proper digital connections (page 21) and set the signal input to DIGITAL.

! Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with

your DVD player.

1 Press to the receiver operation mode.

2 Press SIGNAL SEL to select the input signal corresponding to the source component.

Each press cycles through the options as follows:

! AUTO – The receiver selects the first available signal in the following order: HDMI; DIGITAL; ANALOG.

! ANALOG – Selects an analog signal.

! DIGITAL – Selects an optical or coaxial digital signal.

! HDMI – Selects an HDMI signal.

— When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not

from this receiver.

When set to DIGITAL, HDMI or AUTO (only selected DIGITAL or HDMI), the indicators light according to the

signal being decoded (see Display on page 13).

Better sound using Phase Control

This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at

the listening position in phase, preventing unwanted distortion and/or coloring of the sound.

Phase Control technology provides coherent sound reproduction through the use of phase matching for an opti-

mal sound image. The default setting is on and we recommend leaving Phase Control switched on for all sound

sources.

% Press PHASE (PHASE CONTROL) to switch on phase correction.

The PHASE CONTROL indicator on the front panel lights.

Notes

! Phase matching is a very important factor in achieving proper sound reproduction. If two waveforms are ‘in

phase’, they crest and trough together, resulting in increased amplitude, clarity and presence of the sound

signal. If a crest of a wave meets a trough, then the sound will be ‘out of phase’ and an unreliable sound image

will be produced.

! For discs created with standards other than Phase Control, the LFE channel is delayed upon recording in the

first place. Phase Control Plus function corrects for phase shifting on such discs. For instructions on setting

the Phase Control Plus, see Setting the Audio options on page 63.

! If your subwoofer has a phase control switch, set it to the plus (+) sign (or 0º). However, the effect you can

actually feel when PHASE CONTROL is set to ON on this receiver depends on the type of your subwoofer. Set

your subwoofer to maximize the effect. It is also recommended you try changing the orientation or the place of

your subwoofer.

! Set the built-in lowpass filter switch of your subwoofer to off. If this cannot be done on your subwoofer, set the

cutoff frequency to a higher value.

! If the speaker distance is not properly set, you may not have a maximized PHASE CONTROL effect.

! The PHASE CONTROL mode cannot be set to ON in the following cases:

— When headphones are plugged in.

— When the PURE DIRECT mode is switched on.

— When the HDMI audio output parameter is set to THROUGH in Setting the Setting the Audio options on page

63.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1123 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1123

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info