Bedienungsanleitung Pioneer VSX-1123 (Seite 73 von 115) (Englisch)

536829

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Controlling the rest of your system

Erasing all learnt settings that are in one input function

This operation erases all the operational settings of other devices that have been programmed in one input func-

tion, and restores the factory default.

This function is handy for erasing all data programmed for devices no longer being used.

1 Press and hold RCU SETUP, then press ‘9’ for three seconds.

Release the button after the LED flashes once. The LED continues to flash.

! To cancel the preset setup mode press RCU SETUP.

2 Press and hold the input function button corresponding to the command to be erased for

three seconds.

To erase the operations registered at all the TV CONTROL buttons, press the TV CONTROL INPUT button for 3

seconds.

If the LED lights for one second, the erasing has been successfully completed.

Direct function

! Default setting: On

You can use the direct function feature to control one component using the remote control while at the same

time, using your receiver to playback a different component. This could let you, for example, use the remote

control to set up and listen to a CD on the receiver, and then use the remote control to rewind a tape in your VCR

while you continue to listen to your CD player.

When direct function is on, any component you select (using the input function buttons) will be selected by both

the receiver and the remote control. When you turn direct function off, you can operate the remote control with-

out affecting the receiver.

1 Press and hold RCU SETUP, then press ‘5’ for three seconds.

Release the button after the LED flashes once. The LED continues to flash.

! To cancel the preset setup mode press RCU SETUP.

2 Press the input function button for the component you want to control.

3 Press ‘1’ (On) or ‘0’ (Off) to switch the direct function mode.

If the LED lights for one second and continues to flash, the setting has been successfully completed.

If the LED flashes three times, the setting has failed.

4 Press RCU SETUP to exit the setup.

About the ALL ZONE STBY (All Zone Standby) and DISCRETE ON

(Discrete On) functions

ALL ZONE STBY (All Zone Standby)

The All Zone Standby can be used to turn all zones to OFF when the receiver’s power is switched to standby.

Also, when using separate Pioneer amplifiers/receivers for the sub zones, they can also be set to standby

simultaneously.

! In order to set the power of amplifiers/receivers connected to sub zones to the standby mode, the connected

amplifiers/receivers must be installed or connected in such a way that they can receive remote control signals.

! The power of the amplifiers/receivers can be switched to standby with this operation even when using multiple

Pioneer amplifiers/receivers and their Remote Control Mode have been changed.

DISCRETE ON (Discrete On)

The Discrete On function lets you perform a series of operations: switching to the input you want to play while

turning the receiver’s power on.

When the receiver is installed in an AV rack, etc., and you cannot tell whether the power is set to the on or the

standby mode, this operation is handy because it allows you to switch to the selected input without switching the

receiver’s power to standby, even if the power is on when the operation is performed.

Using All Zone Standby

1 Press ALL ZONE STBY DISCRETE ON.

The LED continues to flash.

2 Press u STANDBY/ON.

The receiver’s power switches to standby and all zones are turned off.

Using Discrete On

1 Press ALL ZONE STBY DISCRETE ON.

The LED continues to flash.

2 Press an input function button you want to play.

The receiver’s power turns on (if it was already on, it stays on, without turning off), and the input switches to the

input selected here.

Resetting the remote control settings

Use this procedure to reset all the remote control’s settings to the factory default.

! When preset codes are set, all the signals learned in the input function buttons are cleared. This function is

convenient when you want to reset some but not all of input function buttons.

1 Press and hold RCU SETUP, then press ‘0’ for three seconds.

Release the button after the LED flashes once. The LED continues to flash.

2 Press and hold the ENTER button for three seconds.

If the LED lights for one second, the erasing has been successfully completed.

Default preset codes

Input function button Preset code

2255

DVD

2197

DVR/BDR

2144

HDMI

2034

0305

5000

SAT/CBL

6329

OPTION

1103

TV CONTROL (INPUT) 0305

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-1123 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-1123

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info