Bedienungsanleitung Pioneer VSX-30 (Seite 44 von 136) (Englisch)

574064

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Basic Setup04

The settings made in the Auto MCACC Setup

should give you excellent surround sound from

your system, but it is also possible to adjust

these settings manually using The Advanced

MCACC menu on page 90 or The System Setup

and Other Setup menus on page 104.

Problems when using the Auto

MCACC Setup

If the room environment is not optimal for the

Auto MCACC Setup (too much background

noise, echo off the walls, obstacles blocking

the speakers from the microphone) the final

settings may be incorrect. Check for household

appliances (air conditioner, fridge, fan, etc.),

that may be affecting the environment and

switch them off if necessary. If there are any

instructions showing in the front panel display,

please follow them.

• Some older TVs may interfere with the

operation of the microphone. If this seems

to be happening, switch off the TV when

doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input

Setup menu if you didn’t hook up your digital

equipment according to the default settings

(see Input function default and possible

settings on page 45). In this case, you need to

tell the receiver what equipment is hooked up

to which terminal so the buttons on the remote

control correspond to the components you’ve

connected.

1 Switch on the receiver and your TV.

Use  RECEIVER to switch on.

2 Press on the remote control,

then press

HOME MENU

A Graphical User Interface (GUI) screen

appears on your TV.

Use /// and

ENTER to navigate through the screens and

select menu items. Press RETURN to confirm

and exit the current menu.

3Select ‘

System Setup

’ from the

Home

4Select ‘

Input Setup

’ from the

System

Setup

menu.

5 Select the input function that you want to

set up.

The default names correspond with the names

next to the terminals on the rear panel (such as

DVD) which, in turn, correspond with the

names on the remote control.

6 Select the input(s) to which you’ve

connected your component.

For example, if your DVD player only has an

optical output, you will need to change the

DVD input function’s Digital In setting from

COAX-1 (default) to the optical input you’ve

connected it to.The numbering (OPT-1 to 2)

corresponds with the numbers beside the

inputs on the back of the receiver.

Note

1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5

inches) will end up with different size settings. You can correct the setting manually using the Manual speaker setup

on page 104.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting

should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

• If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing

environment, we recommend adjusting the settings manually.

RECEIVER

A/V RECEIVER

Exit Return

a. Manual SP Setup

b. Input Setup

c. OSD Language

4.System Setup

d. Network Setup

e. Other Setup

4b.Input Setup

A/V RECEIVER

Exit Finish

Input : DVD

Input Name : Rename

Digital In : COAX-1

HDMI Input :

---

Input Skip : OFF

Component In : Comp-1

12V Trigger1 : OFF

12V Trigger2 : OFF

VSX-31_30_UC.book 44 ページ２０１０年８月２５日　水曜日　午前９時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-30 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info